Abstract:Direct Laser Interference Patterning (DLIP) allows the creation of submicrometric periodic structures by taking advantage of the light interference phenomenon. In this study, DLIP is applied to the surface of zirconia using a picosecond laser source to create a 3 μm periodic line‐like texture. The fabrication of periodic hierarchical structures in zirconia is demonstrated for the first time. The functionalization of zirconia surfaces by accurate and fast printing of periodical patterns embedding sub‐micrometric features is of great interest to many engineering fields and is yet to be explored. This study aims to assess the influence of the Direct Laser Interference Patterning processing parameters on the morphology and microstructure of zirconia surfaces using a 532 nm 10 ps‐pulsed laser source. Well‐defined linear structures with a period of 3 μm are successfully produced. Depending on the laser parameters, the structures are developed at or below the surface level, with higher depths (≈1 μm) being seen for increasing values of laser fluence and pulse overlap. Line‐like hierarchical structures with smaller interference spatial structures (3 μm period) and higher secondary structures with different periods (18, 15, and 12 μm) and heights (7, 5, and 3 μm, respectively) are also obtained on zirconia surface. Ablated regions presented few traces of molten material, nano‐droplets, and sub‐micrometric (<1 μm) pores, while no (sub) micrometric cracks are detected. A slight amount of tetragonal to monoclinic phase transformation (≈5%) is detected by X‐ray diffractometry. A processability map for ps‐laser processing of zirconia is proposed based on the experimental data.

Zirconium-doped hybrid films patterned by soft lithography for distributed-feedback lasers

Modeling Rare-Earth Doped Microfiber Ring Lasers

Distributed Feedback Sol-Gel Zirconia Waveguide Lasers Based on Surface Relief Gratings.

Sol-gel Processing of ZrO2 and Polymer Doped-Zro2 Monolayer Reflective Films with High Laser Damage Threshold

Hybrid Structure Laser Based on Semiconductor Nanowires and a Silica Microfiber Knot Cavity

The Performance of Dye-Doped Zirconia-ORMOSILs Films

Tunable multiwavelength distributed-feedback zirconia waveguide lasers.

Thermally Tunable Multiwavelength Output Waveguide Laser Source of Zirconia-Titania-ORMOSIL Thin Films

Distributed-feedback laser actions in zirconia-ORMOSIL waveguides based on energy transfer between co-doped laser dyes

High-Performance Whispering Gallery Microcavities Fabricated by Direct Laser Writing

Fabrication of Multiscale and Periodically Structured Zirconia Surfaces Using Direct Laser Interference Patterning

doping in pulsed-laser-deposited - for device applications

Hybrid periodic microstructures fabricated on chromium films by SLM-assisted nanosecond laser processing

High Quality Direct Photo-Patterned Microdisk Lasers with Organic-Inorganic Hybrid Materials

Direct Laser Writing of Whispering Gallery Microcavities by Two-Photon Polymerization

Amplified spontaneous emission from an infrared dye doped zirconia-organically modified silicate thin film waveguides

High-Q Asymmetric Polymer Microcavities Directly Fabricated By Two-Photon Polymerization

Enhanced Rare-Earth Ion Doping in Silica Glass by Photopolymerization for Microlaser

Laser Performance In Dye Molecules Doped Xerogels

High Refractive Index and Good Mechanical Property Uv-Cured Hybrid Films Containing Zirconia Nanoparticles

Enhanced Photoluminescence Intensity by Modifying the Surface Nanostructure of Nd3+-doped (pb, La)(Zr, Ti)O3 Ceramics.