Abstract:A new titania-containing ormosil xerogel derived from 80 mol% glycidoxypropyltrimethoxysilane (GPTMS) and 20 mol% titanum alkoxide (Ti(OBu)4) modified by methyl methacrylate (MMA) was synthesized via the sol–gel method as dye laser host. Two kinds of matrices, one without initiator for the polymerization of MMA and another with benzoyl peroxide initiator, were prepared. Their optical properties, microstructure characteristics and surface laser damage thresholds are reported. Laser oscillation was easily achieved in all hand-polished Rhodamine 6G doped titania-containing ormosil xerogels. The effects of dye concentration and dye–matrix combination on the fluorescent emission, slope efficiency, photostability and tunable bandwidth were examined. Benzoyl peroxide is confirmed to be effective in improving the matrix density, but it is harmful to the laser behavior of Rhodamine 6G dye. A laser efficiency of 13% and photostability of 12 GJ/mol were obtained in a 2×10−4 M Rhodamine 6G doped dye laser. A brief comparison of laser performance and matrix properties of Rhodamine 6G doped dye lasers based on the present matrix and PMMA, ormosil and sol–gel silica glass is made.

Laser Performance In Dye Molecules Doped Xerogels

Laser Action in Rhodamine 6G Doped Titania-Containing Ormosils

Microfiber Knot Dye Laser Based on the Evanescent-Wave-Coupled Gain

Optical properties of pyrromethene 567 doped xerogels

Laser Properties and Photostabilities of Laser Dyes Doped in Ormosils

Solid State Dye Laser Based On Titania Containing Ormosils

Efficient Ormosil-Host Tunable Solid-State Dye Laser

The Performance of Dye-Doped Zirconia-ORMOSILs Films

Efficient Tunable All-Solid-State Pyrromethene Dye Laser Pumped By A Laser-Diode Pumped Nd : Yag Laser

The influence of oscillator configurations on performance of solid-state dye laser medium prepared by a new mould fabrication technique

Preparation and characteristics of organical modified silicates xerogel for optical applications

Pyrromethene doped silica laser glasses by sol–gel processes

Influence of the thickness and composition of the solid-state dye laser media on the laser properties

An efficient lasing action from pyrromethene 556 dye-doped organically modified silicates

Optical Performance of Mesostructured Composite Silica Film Loaded with Organic Dye

Doped Mesoporous Silica Fibers: A New Laser Material

Distributed feedback leaky laser emission from dye doped gel-glass dispersed liquid crystal thin film patterned by soft lithography

Influence of energy transfer on fluorescence and lasing properties of various laser dyes co-doped in ORMOSILs

Laser Emission At 0.8 Mu M From Photopumped Luminescent Polymer Microresonators

Solid state dye laser based on copolymer of methyl methacrylate with 2-hydroxyethyl methacrylate

OPTICAL, LUMINESCENT AND STABILITY PROPERTIES OF TEOS-GPTMS GEL GLASSES DOPED WITH RHODAMINE 6G