Abstract:A series of ZrO2 and polymer doped-ZrO2 sols have been synthesized by the controlled hydrolysis of zirconium n-propoxide. Acetic acid was used as the chelating agent. Poly(ethylene glycol)(PEG) 200 and polyvinylpyrrolidone(PVP) were introduced to produce the hybrid sols. ZrO2 and the polymer doped-ZrO2 optical thin films were then prepared by spin-coating the stable sols on K9 glass substrates. Effects of various synthetic parameters were studied, on the sol stability, the microstructure of colloidal system, the structural and optical properties of the films, as well as the laser damage resistance. In our reaction systems, both hydrolysis and chelation coexist. The preference for any of the two reactions strongly depends on the system composition and ultimately determines the stability and microstructure of the colloidal system. Besides, the addition of a proper amount of PEG200 and PVP, which probably acts as the competitive ligands, particle surface protective polymers and structure directive agents, can modify the hydrolysis-condensation process, thus producing more stable, uniform sols with mass fractal structure (fm=2.33—2.46) and average particle diameter of 19.1—23.7nm. Benefiting from the precursor sol structure, the polymer doped-films exhibit excellent surface planarity and uniform inner structure, which endows the films with good optical property and excellent laser damage resistance. For instance, the hybrid film with 10% PEG200 and 15% PVP (mass fractions) showed a high laser damage threshold of 24.5J/cm2 (for 1ns pulse duration) and a reflectivity increase of about 2% than that of the substrate at wavelength of about 1000nm.

The Performance of Dye-Doped Zirconia-ORMOSILs Films

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Amplified spontaneous emission from an infrared dye doped zirconia-organically modified silicate thin film waveguides

Distributed-feedback laser actions in zirconia-ORMOSIL waveguides based on energy transfer between co-doped laser dyes

Thermally Tunable Multiwavelength Output Waveguide Laser Source of Zirconia-Titania-ORMOSIL Thin Films

Tailoring Multifunctional Performance of Dy-doped (ba0.85ca0.15)(zr0.1ti0.9)o3 Ceramics Via Optimizing Ceramic Processing

Sol-gel Processing of ZrO2 and Polymer Doped-Zro2 Monolayer Reflective Films with High Laser Damage Threshold

The influence of oscillator configurations on performance of solid-state dye laser medium prepared by a new mould fabrication technique

Preparation and spectral properties of ORMOSIL films doped with neodymium organic complex

Preparation and Thermochromic Properties of Sol-Gel-derived Zr-doped VO 2 Films

Luminescence and laser performances of coumarin dyes doped in ORMOSILs

Improving Multifunctional Performance of Dy-doped (ba0.85ca0.15)(zr0.1ti0.9)o< Sub>3 Ceramics Via Tailoring Dy-doping Amount and Ceramic Processing

Influence of the thickness and composition of the solid-state dye laser media on the laser properties

Laser Properties and Photostabilities of Laser Dyes Doped in Ormosils

The preparation of silica-based SiO2-ZrO2 films as waveguides by sol-gel process

Infrared And Raman Spectroscopic Studies Of Optically Transparent Zirconia (Zro2) Films Deposited By Plasma-Assisted Reactive Pulsed Laser Deposition

Fluorescent and Laser Properties of Pyrromethene 567 (PM567) Doped into Multi-Precursors Derived Gel Glasses

Influence of Various Coumarin Dyes on the Laser Performance of Laser Dyes Co-Doped into ORMOSILs

Influence of energy transfer on fluorescence and lasing properties of various laser dyes co-doped in ORMOSILs

Energy transfer mechanism between laser dyes doped in ORMOSILs

Synthesis in situ, characterization, and photostability of europium beta-diketone chelates in organically modified silicates (ORMOSILs)