Abstract:Liquid dye lasers are intrinsically suitable for high-average-power operation because their flowing laser gain media can effectively remove the heat produced by laser amplification; thus, liquid dye lasers have a significant place in various laser applications. However, to sufficiently remove the dye solution heated by the laser, a very cumbersome dye flow system is required to achieve a high flow velocity in the dye cell of a high-power dye laser, which limits its applications. In this paper, we found that the pressure and power required to drive the high-speed dye flow are both proportional to the square of the laser beam size along the direction of the flow. Based on this result, we proposed a novel longitudinal pumping scheme that uses elliptical laser beams. This new scheme can significantly reduce the size and energy consumption of dye flow loops in high-power dye lasers. We also developed a dye laser system with a main amplifier using a 1 mm × 4 mm elliptical input laser beam. The amplifier produced an average power of 135 W with a repetition rate of 10 kHz and a conversion efficiency of 39.5%. The M2 factor of the output beam was better than 1.7. The flow parameters to drive the dye flow loops were 2.1×105 Pa, and 0.43 L/s, which gave a clearing ratio of 2 for the amplifier. This new pumping scheme enables high-power dye lasers to be more compact and efficient, making them more flexible for various applications.

The influence of oscillator configurations on performance of solid-state dye laser medium prepared by a new mould fabrication technique

A Novel Solid State Dye Laser Gain Medium With Sandwich Structure

Novel solid state dye lase gain medium with sandwich structure

Influence of the thickness and composition of the solid-state dye laser media on the laser properties

Laser Properties and Photostabilities of Laser Dyes Doped in Ormosils

The Performance of Dye-Doped Zirconia-ORMOSILs Films

Distributed-feedback laser actions in zirconia-ORMOSIL waveguides based on energy transfer between co-doped laser dyes

Influence of energy transfer on fluorescence and lasing properties of various laser dyes co-doped in ORMOSILs

Luminescence and laser performances of coumarin dyes doped in ORMOSILs

OPTICAL, LUMINESCENT AND STABILITY PROPERTIES OF TEOS-GPTMS GEL GLASSES DOPED WITH RHODAMINE 6G

Influence of Doping Position on the Extinction Ratio of Mach-Zehnder-Interference Based Silicon Optical Modulators

Enhanced laser performances based on energy transfer in multi-dyes co-doped solid media

Fabrication of three-dimensional microstructures based on 1064 nm laser-induced thermoplastic expansion

Fluorescent and Laser Properties of Pyrromethene 567 (PM567) Doped into Multi-Precursors Derived Gel Glasses

Thermally Tunable Multiwavelength Output Waveguide Laser Source of Zirconia-Titania-ORMOSIL Thin Films

Influence of Various Coumarin Dyes on the Laser Performance of Laser Dyes Co-Doped into ORMOSILs

Tunable Solid-State Dye Laser with P567 Doped Sample Made by Novel Stepwise Synthesis Technique

Effects of Ho3+-Doping Concentration on the Performances of Resonantly Pumped Ho:Yag Ceramic Lasers

Doped Mesoporous Silica Fibers: A New Laser Material

A new longitudinal pumping scheme that uses elliptical laser beams to improve the compactness and efficiency of high-power dye lasers

Experimental Research on the Stability and the Multi-Longitudinal Mode Interference of Bidirectional Outputs of Ld-Pumped Solid-State Ring Laser