Abstract:Introduction Laser peen forming (LPF) is a forming technique using laser-induced plasma to impact the workpiece spot-by-spot and forming the metal sheet into a specified curvature. It is a complex physics process including laser ablation, shock wave propagation, material yielding and deformation accumulation. A high-intensity short-pulsed laser irradiates on the surface of the workpiece, as a result, high pressure plasma generates on the surface of the workpiece in the confinement of water. In the impact of high pressure plasma, the shock pressure generates and spreads to the depth direction. The amplitude of the shock wave arrives at 1-10 GPa and the time duration is around 100 nanoseconds, as a consequence LPF is a high-dynamic response process due to the laser shock process. When the shock wave exceeds the Von Mises stress of materials, the workpiece in the shock zone yields and generates plastic strain. After laser scanning over the workpiece surface, the deformation is accumulated with the expanding of the plastic zone, resulting in the workpiece bending into a small curvature convex shape. In order to overcome the difficulty of improving the pulse energy, laser-assisted laser peen forming(LALPF) was proposed by Hu et al. [1] to improve the bending capability. LALPF adapted CW laser heating to increase the deformation. Laser heating plays an assisted role in softening the material and altering the stress state of material during LALPF. Simutationly, the back surface of the workpiece is heating by continuous wave (CW) laser which is coaxial with the pulsed laser. The material absorbs the CW laser energy resulting in high temperature field in the local area. The local high temperature decreases the yield strength, inducing thermal stress even plastic thermal strain owing to the nonuniform expansion of material. Thus, lager and deeper plastic strain is generated in the laser shock process and the deformation of the workpiece increase compared with the LPF in room temperature.

Laser Peen Forming Induced Two Way Bending of Thin Sheet Metals and Its Mechanisms

Three-dimensional numerical simulation and experimental study of sheet metal bending by laser peen forming

Experimental Investigation on the Bending Deformation of thin 1060 Pure Aluminum Sheet by Laser Peen Forming

Research on Bending Angels of Laser Peen Forming Without Confine Layer

Numerical And Experimental Investigation Of Deformation Field During Laser Forming Of Metal Sheet

Numerical modelling of deformation prediction for laser-assisted laser peen forming

Investigation on the bending deformation of laser peen forming with a simplified eigenstrain-based finite element model

Application of laser peen forming to bend fibre metal laminates by high dynamic loading

The Effect of Elastic Pre-Bending on the Laser Peen Forming of 2024-T351 Aluminum Alloy Plate

Process and Development of Laser Forming

Research on the mechanisms of laser forming for the metal plate

Increasing the Capability of Laser Peen Forming to Bend Titanium Alloy Sheets with Laser-Assisted Local Heating

A Study on Bending Direction of Sheet Metal in Laser Forming

Deformation Behaviors of Laser Forming of Ring Sheet Metals

Real-time monitoring of temperature gradients and bending mechanism in multi-scan laser forming process

Numerical Modeling and Mechanism Analysis of Hybrid Heating and Shock Process for Laser-Assisted Laser Peen Forming

Analysis and Control of Edge Effects in Laser Bending

FEM Realization of Laser Curve Bending Process

Recent Progress in Laser Peen Forming of Large Scale Panel

Experimental Research on Pulse Laser Forming of Metal Sheet

Effect of Elastic Prestress on the Laser Peen Forming of Aluminum Alloy 2024-T351: Experiments and Eigenstrain-Based Modeling