Abstract:Sodium alginate—a natural innoxious polymer, which can be dissolved in cold water by mechanical stirring and in which irreversible gelation takes place when enough calcium ions are added—is applied for in situ forming process of ceramics by using chelator to control its gelling behavior. In the present work, the viscosity of sodium alginate solution and factors influencing on it were analyzed. How to control the gelation behavior was discussed. The rheology property of the slurry was examined. An appropriate method to apply the gelation of sodium alginate in order to fabricate alumina ceramic green body was systematically investigated. The viscosity of alumina slurry with 50 vol.% Al2O3 and 1.8 vol.% Ca3(PO4)2 dispersed by 1 wt.% sodium alginate solution is less than 400 MPa s when the shear rate is higher than 50 s−1. The green body has uniform structure and smooth surface, and bending strength is about 8 MPa. After being sintered at 1550 °C for 2 h the linear shrinkage of ceramics composed of 95% alumina is about 15.7% during firing and the relative density of the final product is about 98.7%. Bending strength reaches 320 MPa. SEM images show compact and uniform microstructure.

Drying Behaviour Of Gelcast Green Alumina Parts Utilizing Peg Solution

Suppression of water-soluble polymer on surface-exfoliation of gekcast green body of alumina

Gelcasting of alumina ceramics in the mixed acrylamide and polyacrylamide systems

Suppression of Surface-Exfoliation by Gelcasting Ceramics with Mixed Polymer-Monomer Solutions

Elimination of Surface Spallation of Alumina Green Bodies Prepared by Acrylamide‐Based Gelcasting Via Poly(vinylpyrrolidone)

Gelcasting of Alumina with a Mixed PVP–MAM System

Re-fluidising the aged gel for high-density alumina green body

3D gel printing of alumina ceramics followed by efficient multi-step liquid desiccant drying

GELCASTING OF ALUMINA SLURRY DISPERSED IN SILICA SOL WITHOUT DE-AIRING PROCESS

Room-temperature Gelcasting of Alumina with Tartaric Acid and Glutaraldehyde

Study of the Inhibitive Role of Polyethylene Glycol on the Surface-Exfoliation of Ceramic Green Bodies Prepared by Gelcasting

Freeze-Drying Defect Control of Alumina-Based Ceramic Body Prepared with Gel Casting Technology

Gelating and Drying Process of Aqueous Gelcasting Aluminum Nitride Ceramics

Fabrication of Alumina Green Body Through Gelcasting Process Using Alginate

Study On Gel-Tape Casting In The Mixed Polyvinyl Alcohol And Acrylamide Systems

EFFECT OF WATER-SOLUBLE POLYACRYLAMIDE ON GELCASTING OF ALUMINA

Gelcasting of Alumina Ceramic Components in Nontoxic Na-alginate–CaIO3–PVP Systems

Alumina casting based on gelation of gelatine

New gel-casting process for alumina ceramics based on gelation of alginate

Gelcasting of Alumina Via Cross-Linking of a Polyelectrolyte Dispersant

Effects of glycerol addition on the slurry dispersion and mechanical properties of alumina ceramics prepared by gel-casting process