Abstract:In view of the characteristics and risks of ammonia, its removal is important for industrial production and environmental safety. In this study, viscose-based activated carbon fiber (ACF) was used as a substrate and chemically modified by nitric acid impregnation to enhance the adsorption capacity of the adsorbent for ammonia. A series of modified ACF-based adsorbents were prepared and characterized using BET, FTIR, XPS, and Boehm titration. Isotherm tests (293.15 K, 303.15 K, 313.15 K) and dynamic adsorption experiments were performed. The characterization results showed that impregnation with low concentrations of nitric acid not only increased the surface acidic functional group content but also increased the specific surface area, while impregnation with high concentrations of nitric acid could be able to decrease the specific surface area. ACF-N-6 significantly increased the surface functional group content without destroying the physical structure of the activated carbon fibers. The experimental results showed that the highest adsorption of ammonia by ACFs was 14.08 mmol-L−1 (ACF-N-6) at 293 K, and the adsorption capacity was increased by 165% compared with that of ACF-raw; by fitting the adsorption isotherm and calculating the equivalent heat of adsorption and thermodynamic parameters using the Langmuir–Freundlich model, the adsorption process could be found to exist simultaneously. Regarding physical adsorption and chemical adsorption, the results of the correlation analysis showed that the ammonia adsorption performance was strongly correlated with the carboxyl group content and positively correlated with the relative humidity (RH) of the inlet gas. This study contributes to the development of an efficient ammonia adsorption system with important applications in industrial production and environmental safety.

Research on Surface Properties of Modified Activated Carbon Fiber and Its Mercury Adsorption Performance

Removing mercury by modified activated carbon fibers

Study on adsorption performance of polyacrylonitrile-based activated carbon fiber for trace of hexavalent chromium

Effect of Oxidation Treatment on the Adsorption and the Stability of Mercury on Activated Carbon.

Efficient Adsorption of Ammonia by Surface-Modified Activated Carbon Fiber Mesh

Studies on Mercury Adsorption Species and Equilibrium on Activated Carbon Surface

The effect of surface properties in activated carbon on mercury adsorption

Effects of Properties of Activated Carbon on Its Activity for Mercury Removal and Mercury Desorption from Used Activated Carbons

Surface modification of activated carbon fiber and its adsorption for vitamin B1 and folic acid

Desulfurization process of nitrogen-containing activated carbon fibers

Mercury Adsorbability of Activated Carbon in an Atmosphere of Nitrogen

Increasing Oxygen Functional Groups of Activated Carbon with Non-Thermal Plasma to Enhance Mercury Removal Efficiency for Flue Gases

Adsorption Of Volatile Organic Compounds In Nitrogen Streams On Oxidized Activated Carbon Fibres

Adsorption of Styrene on Ammonia-Treated Activated Carbon Fibers

Experimental Study on Mercury Adsorption and Adsorbent Regeneration of Sulfur-Loaded Activated Carbon

Role of Surface Chemistry in Modified ACF (activated Carbon Fiber)-Catalyzed Peroxymonosulfate Oxidation

Preparation of Amine Group-Containing Chelating Fiber for Thorough Removal of Mercury Ions

Enhanced Adsorption of As(III) on Chemically Modified Activated Carbon Fibers

Influence of Surface Treatment by Nitrogen Plasma on Absorption Property of AC

ENHANCEMENT OF CONTINUOUS REMOVAL OF SO2 ON SURFACE-MODIFIED ACTIVATED CARBON FIBERS BY NITROGEN-CONTAINING FUNCTIONAL GROUPS

Research progress in ACF surface modification and nitrogen oxide removal