Oxidative Adsorption of Elemental Mercury by Activated Carbon in Simulated Coal-Fired Flue Gas
Changxing Hu,Jinsong Zhou,Jianxin Li,Jiao Zheng,Yongchuan Wang,Zhongyang Luo,Kefa Cen
DOI: https://doi.org/10.1021/ef101100y
IF: 4.6541
2010-01-01
Energy & Fuels
Abstract:Bench-scale adsorption experiments were conducted to explore and verify the change of mercury speciation during elemental mercury (Hg-0) adsorption by activated carbon (AC) impregnated with chlorine using a continuous mercury monitor. Results uniquely demonstrated that Hg-0 was completely oxidized to divalent mercury (Hg2+) during the adsorption process of Hg-0 by AC whether in N-2 gas or in simulated coal-fired flue gas. Without the presence of a chemical oxidizing element, such as chlorine, on the surface of the sorbent, AC would not adsorb Hg-0 in N-2 gas. When the oxidizing element was consumed, the breakthrough of Hg-0 adsorption by AC occurred. Hg-0 was detected as the only Hg species at the outlet of the adsorption bed. However, the adsorption of Hg-0 by AC did not reach its full capacity. When the adsorption atmosphere was switched from N-2 gas to simulated flue gas, AC started to absorb Hg-0 again. When the AC reached its full capacity for Hg-0, oxidation of Hg-0 continued, because when breakthrough occurred, Hg2+ was detected at the reactor outlet. However, the oxidation of Hg-0 was not due to chlorine on the surface of AC but the components in simulated flue gas, such as NO, NO2, HCl, etc., which catalyzed oxidation of Hg-0 on the AC surface.