Abstract:The micro-electro-mechanical system (MEMS) resonator developed based on surface processing technology usually changes the section shape either due to excessive etching or insufficient etching. In this paper, a section parameter is proposed to describe the microbeam changes in the upper and lower sections. The effect of section change on the mechanical properties is studied analytically and verified through numerical and finite element solutions. A doubly-clamped microbeam-based resonator, which is actuated by an electrode on one side, is investigated. The higher-order model is derived without neglecting the effects of neutral plane stretching and electrostatic nonlinearity. Further, the Galerkin method and Newton⁻Cotes method are used to reduce the complexity and order of the derived model. First of all, the influence of microbeam shape and gap variation on the static pull-in are studied. Then, the dynamic analysis of the system is investigated. The method of multiple scales (MMS) is applied to determine the response of the system for small amplitude vibrations. The relationship between the microbeam shape and the frequency response is discussed. Results show that the change of section and gap distance can make the vibration soften, harden, and so on. Furthermore, when the amplitude of vibration is large, the frequency response softening effect is weakened by the MMS. If the nonlinearity shows hardening-type behavior at the beginning, with the increase of the amplitude, the frequency response will shift from hardening to softening behavior. The large amplitude in-well motions are studied to investigate the transitions between hardening and softening behaviors. Finally, the finite element analysis using COMSOL software (COMSOL Inc., Stockholm, Sweden) is carried out to verify the theoretical results, and the two results are very close to each other in the stable region.

Modeling And Characterization Of A Mems G-Sensor With Anti-Stiction Raised Strips For Vibration Monitoring Systems

Investigation of a Complete Squeeze-Film Damping Model for MEMS Devices

A New Modeling Method of MEMS System's Noise

Thermal stress of MOEMS Accelerometers Based on Grating Interferometric cavity

A Stiffness-Tunable MEMS Accelerometer

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Modeling And Experimental Study On Characterization Of Micromachined Thermal Gas Inertial Sensors

Study on Encapsulation and SMT Technology for MEMS High-g Acceleration Sensors

Modeling and Analysis of MEMS Capacitive Pressure Sensors with Vertical Comb Fingers

Multiple-Degree-of-Freedom Modeling and Simulation for Seismic-Grade Sigma-Delta MEMS Capacitive Accelerometers

Accurate Assessment of Packaging Stress Effects on MEMS Sensors by Measurement and Sensor–Package Interaction Simulations

Investigation of nonlinear squeeze-film damping involving rarefied gas effect in micro-electro-mechanical-systems

Fabrication and Characterization of Monolithic Integrated Three-Axis Acceleration/Pressure/Magnetic Field Sensors

Structure-air Damping Coupling Analysis of Micromachined Gyroscope

System Modeling of a MEMS Vibratory Gyroscope and Integration to Circuit Simulation

Design and Fabrication of a Micro-Electromechanical System Sandwich Capacitive Accelerometer

Fabrication and Characterization of a MEMS Thermal Convective Accelerometer on Silicon-in-Glass Substrate

An Optical Interferometry Based MEMS Accelerometer Applicable to Seismic-Grade Measurement

Static and Dynamic Mechanical Behaviors of Electrostatic MEMS Resonator with Surface Processing Error

Modeling and Analysis of a Closed-Loop System for High-Q MEMS Accelerometer Sensor

Modeling of gold microbeams as strain and pressure sensors for characterizing MEMS packages