Abstract:Aiming at the demodulation signal compensation technique for intensity modulation noise suppressing in a digital RFOG, which is based on the detection of closed loop’s second-harmonic, the quantization precision for second-harmonic is discussed and optimized. By analyzing second-harmonic’s fluctuation under the intensity modulation noise equal to shot noise limited sensitivity, the expression for the required minimum quantization bits of second-harmonic signal is obtained. Based on this expression, numerical simulations are carried out to optimize the quantization bits in a digital RFOG in detail. Based on over-sampling technique, the stability of gyro output signal with different quantization bits and rotation rates is tested to verify the theoretically analyzed results. It is concluded that the minimum quantization bits of second-harmonic is related to the rotation rate and the ratio of second-harmonic’s maximum to minimum, and it gets larger as these two parameters are increased. Especially, the required minimum quantization bits for second-harmonic would generally exceed that supported only by hardware circuits, which leads to the adoption of over-sampling technique. And it is proven that the quantization precision improvement for second-harmonic, realized by the over-sampling technique, does work in improving the effect of intensity modulation noise suppressing.

A Latency-Proof Quantization Noise Reduction Method for Digitally-Controlled Ring Oscillators

An FIR-Embedded Noise Filtering Method for $\delta \sigma$ Fractional-N PLL Clock Generators

Optimization of Second-Harmonic's Quantization Precision for Intensity Modulation Noise Suppressing in a Digital RFOG

A Compact 0.8–6ghz Fractional-N PLL with Binary-Weighted D/A Differentiator and Offset-Frequency Δ−Σ Modulator for Noise and Spurs Cancellation

A Fractional-N PLL for Multiband (0.8–6 GHz) Communications Using Binary-Weighted D/A Differentiator and Offset-Frequency Δ-Σ Modulator

Design of Analog Circuits in Multi-Bit Quantized Audio DAC

Enhanced FIR-embedded Noise Reduction Method with Hybrid Phase Detection for Semidigital Fractional-N Phase-Locked Loops

A Quantization Noise Reduction Method for Delta-Sigma Fractional-N PLLs Using Cascaded Injection-Locked Oscillators

A 1ghz Fractional-N PLL Clock Generator with Low-OSR ΔΣ Modulation and FIR-Embedded Noise Filtering

A Digital Phase Noise Cancelling Scheme for Ring Oscillator-based Fractional-N ADPLL

Customized Zero Frequency Control for Hybrid FIR Noise Filtering in ΣΔ Fractional-N PLL

A 2.4-Ghz ΔΣ Fractional-N Synthesizer with Space-Time Averaging for Noise Reduction

Customized zero frequency control for hybrid FIR noise filtering in ΔΣ fractional-N PLL

A Noise and Spur Reduction Technique for ΔΣ Fractional-N Bang-Bang PLLs with Embedded Phase Domain Filtering.

A ΔΣ DPLL with 1b TDC, 4b DTC and 8-tap FIR filter for low-voltage clock generation/modulation systems

A 4 to 5ghz Digitally Controlled Ring Oscillator with 100khz Resolution Using Noise Cancellation Technology in 40nm CMOS.

Fractional- N PLL with multi-element fractional divider for noise reduction

A Fractional- $N$ PLL With Space–Time Averaging for Quantization Noise Reduction

A ΔΣ Fractional-N Synthesizer with Customized Noise Shaping for WCDMA/HSDPA Applications.

A Fractional-N PLL for Digital Clock Generation with an FIR-Embedded Frequency Divider

A Noise-Insensitive High-Resolution Digitally Controlled Ring Oscillator with Multipoint-Tuning Technique