Abstract:Wide frequency coverage phase locked loops (PLL) with fine frequency resolution and low phase noise are one of the most critical building blocks for the high speed communication systems. Voltage domain quantization scheme employing ADCs has been proposed in previous fractional-N PLLs as an alternative to DTC-based quantization cancellation. However, though the voltage-domain quantization is linear in modern processes, the potential nonlinearity in the time-to-voltage conversion preceding the ADC results in fractional spurs and noise folding, which will severely degrade the PLL output if not properly addressed. One approach applies linearity compensation that often requires sophisticated digital processing [1]–[2]. The other approach utilizes digital-to-time converters (DTC) or digital-to-analog converters (DAC) to generate a replica of the divider quantization noise and then cancels out this noise in the analog domain before it propagates into the loop [3]–[4], thus relaxing the requirement for linear phase detection range. Prior arts have achieved remarkable phase noise performances, at the cost of significantly higher design complexity. This work describes a wideband fractional-N PLL that uses an integrator-based time-to-voltage converter and a 10-bit SAR ADC for direct phase error digitization as shown in Fig. 1. Without linearity calibration or DTC/DAC-based quantization noise cancellation, the proposed PLL achieves low fractional spur and low jitter across a wide frequency range.

A Fractional-N PLL for Digital Clock Generation with an FIR-Embedded Frequency Divider

Multi-chip Phase Synchronization Circuit of Fractional-N PLL

A 1ghz Fractional-N PLL Clock Generator with Low-OSR ΔΣ Modulation and FIR-Embedded Noise Filtering

A Fractional-N PLL for Multiband (0.8–6 GHz) Communications Using Binary-Weighted D/A Differentiator and Offset-Frequency Δ-Σ Modulator

Optimized System Design for Fully Integrated Fractional-N Pll

Fractional-N Frequency Synthesis: Overview and Practical Aspects with Fir-Embedded Design

An FIR-Embedded Noise Filtering Method for $\delta \sigma$ Fractional-N PLL Clock Generators

A Fractional- $N$ PLL With Space–Time Averaging for Quantization Noise Reduction

A Fully-Synthesizable Fractional-N Injection-Locked PLL for Digital Clocking with Triangle/Sawtooth Spread-Spectrum Modulation Capability in 5-Nm CMOS

A Bias-Current-Free Fractional-N Hybrid PLL for Low-Voltage Clock Generation

A Fractional- $N$ Sampling PLL with a Merged Constant-Slope DTC and Sampling PD

Fractional- N PLL with multi-element fractional divider for noise reduction

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

A Hybrid Frequency/phase-Locked Loop for Versatile Clock Generation with Wide Reference Frequency Range

An 8-14Ghz 180Fs-Rms DTC-Less Fractional ADPLL with ADC-Based Direct Phase Digitization in 40nm CMOS

A Reference-Sampling Based Calibration-Free Fractional-N PLL with a PI-Linked Sampling Clock Generator

A Hybrid Spur Compensation Technique for Finite-Modulo Fractional-N Phase-Locked Loops

A Fractional-N Sub-Sampling PLL Using a Pipelined Phase-Interpolator with an FoM of -250 Db.

A 56-GHz Fractional-N PLL With 110-fs Jitter

A DTC-Free Fractional-N BBPLL with FIR-Embedded Injection-Locked-Oscillator-Based Phase-Domain Lowpass Filter

A 265-$\Mu$ W Fractional-${N}$ Digital PLL with Seamless Automatic Switching Sub-Sampling/Sampling Feedback Path and Duty-Cycled Frequency-Locked Loop in 65-Nm CMOS