Abstract:Well ordered and uniform porous oxide film was prepared by electrochemical anodic oxidation on the surface of Ti-Al powder alloy,using hydrofluoric acid and chromyl acid as electrolyte. The surface morphology and phases of oxide films were characterized with field emission scanning electron microscope (FESEM),X-ray diffractometer (XRD) and X-ray photoemission spectroscopy (XPS). The effect of electrolyte and oxidation voltage on the morphology of porous films was also investigated. The formation mechanism of porous oxide film was explored by electrochemical technology. Experimental results show that porous oxide film would not form in HF electrolyte without the addition of CrO3,contrarily serious corrosion will happen on the alloy surface. Both HF concentration and oxidation voltage affect the morphology of oxide film. Well ordered oxide porous film can be obtained in solution containing 0.2% HF(mass fraction),the average diameter of pores is ～50 nm. The porous film is regular when oxidation potential is 10 V,while the pore structure may be destroyed with the increasing of potential. The porous oxide film is mainly composed of amorphous TiO2,Al2O3 and small amount of crystalline Ti2O as well as Al. The growth of porous film experiences three stages:formation of barrier layer,initial formation of porous layer and stable growth of porous layer.

Preparation of self-organized titania nanoporous films on Ti alloys by anodic oxidation

Self-assembled nanoporous titania layers on Ti alloys by anodic oxidation

Experimental Study of Preparation of TiO_2 Porous Films on the Surface of TC4 Titanium Alloy by Anodic Oxidation

PREPARATION AND CHARACTERIZATION OF TITANIA NANO TUBE ARRAY BY ANODIC OXIDATION

Preparation of Porous Anatase Titania Film

Preparation of TiO2 Porous Films on Pure Titanium Surface

Preparation of self-organized nanotubes on Ti-50Ta alloy by anodic oxidation

Fabrication of Porous Oxide Film on Ti-Al PM Alloy Surface

Fabrication and Characterization of Anodic Oxide Films on a Ti-10V-2Fe-3Al Titanium Alloy

Preparation and characterization of anodic oxide film on titanium alloy Ti-10V-2Fe-3Al in sodium oxalate electrolyte

Fabrication of Titania Film on Niti Alloy by A Deposition-Assisted Advanced Oxidation Method

Self-organizing Evolution of Anodized Oxide Films on Ti-25Nb-3Mo-2Sn-3Zr Alloy and Hydrophilicity

Preparation of TiO2 Nanotubes on Foamed Titanium

Miscrostructure and Photoelectrical Performance of Titanium Oxide Film Prepared by In-Situ Oxidation on TiNi Alloy Surface

Fabrication of Titanium Oxide Nanotube Arrays by Anodic Oxidation

Study on preparation of TiO_2 nanotube arrays by anodizing processes

Anodic Fabrication of Ti-Ni-Si-O Nanostructures on Ti10Ni5Si Alloy

Preparation of TiO2 Nanotube Arrays on Porous Titanium and Formation Mechanism

Fabrication of TiO2 nanotube arrays on biologic titanium alloy and properties

Preparation of Nanoporous-Structure Thin Film on SP700 Titanium Alloy Surface

Preparation and Biocompatibility of Micro-arc Oxidation Film on TLM Titanium Alloy Surface