Abstract:As a typical non-destructive testing method, electromagnetic acoustic testing is often used to test metal materials and components. The main shortcoming in practical application is poor energy conversion efficiency, especially in the case of non-ferromagnetic materials. To solve this problem, this article proposed a Lamb electromagnetic acoustic transducer (EMAT) for ultrasonic testing of non-ferromagnetic plates. The new type of EMAT consists of a track coil and a group of periodic permanent magnets (PPMs). Conventional Lamb wave EMATs typically use meander coil and rectangular magnet to generate Lorentz forces with a periodic distribution. The track coil provides stronger eddy currents than meander coil, and the PPMs provide more even bias magnetic fields than rectangular magnet, which generates Lorentz forces with a similar periodic distribution and larger values, compared with the conventional Lamb wave EMAT. Then two-dimensional finite element (FE) simulation models of the conventional meander-line-coil (MLC) and TCPPM transducers were completed to compare the distribution of eddy currents, bias magnetic fields and Lorentz forces. Eventually, a series of transducers with coils of different sizes were manufactured and incorporated into the experimental study. The experimental results proved that the TCPPM transducers could generate and receive more powerful ultrasonic Lamb waves than the conventional MLC EMATs. Due to the dispersion characteristics, pure A0 or S0 mode of ultrasonic Lamb waves can be generated and received by selecting suitable frequencies. Compared with the MLC EMATs, the maximum amplitudes of the A0 and S0 modes were increased by 18.9 dB and 10.4 dB, respectively. The contribution of the direction of Lorentz forces to A0 and S0 mode Lamb waves was also verified by comparing the signals of three groups of TCPPM EMATs with different structures.

A Method for Optimizing Excitation of Electromagnetic Ultrasonic Lamb Wave

An Optimal Excitation Mode of Electromagnetic Ultrasonic Lamb Wave

Optimal Design of Lamb Wave Electromagnetic Acoustic Transducers for Improving Their Excitation Performance

Minimizing influence of multi-modes and dispersion of electromagnetic ultrasonic lamb waves.

Multi-objective optimization of Lamb wave electromagnetic acoustic transducer

Excitation Waveform Design for Lamb Wave Pulse Compression

Excitation Series Design and Pulse Compression Synthesis for High-Resolution Lamb Wave Inspection

An Improved Design of Lamb Wave EMAT for A0 Wave Generation and Enhancement

Receiving Performance Analysis and Optimal Design of Surface Wave Electromagnetic Acoustic Transducers in Nonferromagnetic Materials

Characterizing Excitability of Lamb Waves Generated by Electromagnetic Acoustic Transducers with Coupled Frequency Domain Models.

An Emat Design with Track Coil and Periodic Permanent Magnets for Enhanced Ultrasonic Lamb Wave Generation in Non-Ferromagnetic Plates

Enhancement of Omni-Directional EMAT Signal Using a Optimized Magnetic Circuit Design

Selective Generation of Ultrasonic Lamb Waves by Electromagnetic Acoustic Transducers

Coded Excitation for Ultrasonic Testing: A Review

Optimal Design of Surface Wave Emats for Enhancing Their Ultrasonic Signal Strength

An EMAT for improving the purity and amplitude of S<sub>0</sub> Lamb waves

Enhancement of Ultrasonic Signal Using a New Design of Rayleigh-wave Electromagnetic Acoustic Transducer

Structural Design and Optimization of Low-Frequency High-Power Electromagnetic Transducer

Optimization Design of Surface Wave Electromagnetic Acoustic Transducers Based on Simulation Analysis and Orthogonal Test Method

Study on multi-frequency characteristics of a longitudinal ultrasonic transducer with stepped horn

Focusing Dimension Optimization of Shear Vertical Wave EMATs Using Orthogonal Test Method