Abstract:In this paper an axisymmetric model of an omnidirectional electromagnetic acoustic transducer (EMAT) used to generate Lamb waves in conductive plates is introduced. Based on the EMAT model, the structural parameters of the permanent magnet were used as the design variables while other parameters were fixed. The goal of the optimization was to strengthen the generation of the A0 mode and suppress the generation of the S0 mode. The amplitudes of the displacement components at the observation point of the plate were used for calculation of the objective functions. Three approaches to obtain the amplitudes were discussed. The first approach was solving the peak values of the envelopes of the time waveforms from the time domain simulations. The second approach also involved calculation of the peaks, but the waveforms were from frequency domain model combined with the forward and inverse Fourier transforms. The third approach involved a single frequency in the frequency domain model. Single and multi-objective optimizations were attempted, implemented with the genetic algorithms. In the single objective optimizations, the goal was decreasing the ratio of the amplitudes of the S0 and A0 modes, while in the multi-objective optimizations, an extra goal was strengthening the A0 mode directly. The Pareto front from the multi-objective optimizations was compared with the estimation from the data on the discrete grid of the design variables. From the analysis of the results, it could be concluded that for a linearized steel plate with a thickness of 10mm and testing frequency of 50kHz, the point with minimum S0/A0 could be selected, thus the multi-objective optimization effectively degenerated to the single objective optimization. While for an aluminum plate with a thickness of 3mm and frequency of 150kHz, without further information it would be difficult to select one particular solution from the Pareto front.

Structural Design and Optimization of Low-Frequency High-Power Electromagnetic Transducer

Design and optimization of low frequency high power transducer

Design and Optimization of High-Power and Low-Frequency Broadband Transducer with Giant Magnetostrictive Material

Structural Optimization and Performance of a Low-Frequency Double-Shell Type-IV Flexural Hydroacoustic Transducer

3-D Finite Element Analysis and Optimum Design of Electromagnetic Acoustic Transducers

Research on Electromagnetic High Power Ultra Low Frequency Underwater Sound Source

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

A Multi-Objective Structural Optimization of an Omnidirectional Electromagnetic Acoustic Transducer

Design Optimization of Ultrasonic Transducer for Medical Application Based on an Integrating Method

Optimization Design of Surface Wave Electromagnetic Acoustic Transducers Based on Simulation Analysis and Orthogonal Test Method

Receiving Performance Analysis and Optimal Design of Surface Wave Electromagnetic Acoustic Transducers in Nonferromagnetic Materials

Optimal Design of Lamb Wave Electromagnetic Acoustic Transducers for Improving Their Excitation Performance

Design and Optimization of Low-Frequency Broadband Acoustic Absorption Structures Based on Multi-Cellular Element Co-Coupling

Optimal Design of Meander-line-coil Surface Wave Electromagnetic Acoustic Transducers

Structural Design of a New-Type Underwater Acoustic Projectile Transducer

Design of low-frequency high-power Janus-Helmholtz underwater acoustic transducer

Design of Ultrasonic Transducer Structure for Underwater Wireless Power Transfer System

Design Optimization and Experimental Study of Acoustic Transducer in Near Field Acoustic Levitation.

Optimization Design of High Frequency Piezoelectric Ultrasonic Transducer for IC Packaging

Optimization Design of Ultrasonic Transducer in Ultrasonic-Arc Hybrid Welding System

Intelligent Optimization Design of a Phononic Crystal Air-Coupled Ultrasound Transducer