Abstract:As a typical non-destructive testing method, electromagnetic acoustic testing is often used to test metal materials and components. The main shortcoming in practical application is poor energy conversion efficiency, especially in the case of non-ferromagnetic materials. To solve this problem, this article proposed a Lamb electromagnetic acoustic transducer (EMAT) for ultrasonic testing of non-ferromagnetic plates. The new type of EMAT consists of a track coil and a group of periodic permanent magnets (PPMs). Conventional Lamb wave EMATs typically use meander coil and rectangular magnet to generate Lorentz forces with a periodic distribution. The track coil provides stronger eddy currents than meander coil, and the PPMs provide more even bias magnetic fields than rectangular magnet, which generates Lorentz forces with a similar periodic distribution and larger values, compared with the conventional Lamb wave EMAT. Then two-dimensional finite element (FE) simulation models of the conventional meander-line-coil (MLC) and TCPPM transducers were completed to compare the distribution of eddy currents, bias magnetic fields and Lorentz forces. Eventually, a series of transducers with coils of different sizes were manufactured and incorporated into the experimental study. The experimental results proved that the TCPPM transducers could generate and receive more powerful ultrasonic Lamb waves than the conventional MLC EMATs. Due to the dispersion characteristics, pure A0 or S0 mode of ultrasonic Lamb waves can be generated and received by selecting suitable frequencies. Compared with the MLC EMATs, the maximum amplitudes of the A0 and S0 modes were increased by 18.9 dB and 10.4 dB, respectively. The contribution of the direction of Lorentz forces to A0 and S0 mode Lamb waves was also verified by comparing the signals of three groups of TCPPM EMATs with different structures.

Development of a Helical Lamb Wave Electromagnetic Acoustic Transducer for Pipeline Inspection

Design of Electromagnetic Acoustic Transducer for Helical Lamb Wave With Concentrated Beam

Magnetostrictive Helical Array Transducer for Inspecting Spiral Welded Pipes Using Flexural Guided Waves

EMAT Design for Defect Inspection in Pipe-like Structure Using Helical Lamb Wave

Characteristic Analysis of Electromagnetic Acoustic Transducers for Helical Shear Horizontal Wave Based on Magnetostrictive Effect

A Longitudinal Mode Electromagnetic Acoustic Transducer (EMAT) Based on a Permanent Magnet Chain for Pipe Inspection.

Development of a Torsional Guided Wave EMAT for Internal Inspection of Ferromagnetic Pipes

A Flexible and Noncontact Guided-Wave Transducer Based on Coils-Only EMAT for Pipe Inspection

Development of a Meander-Coil-Type Dual Magnetic Group Circumferential Magnetostrictive Guided Wave Transducer for Detecting Small Defects Hidden behind Support Structures

Alternating Winding Magnetostrictive Electromagnetic Acoustic Transducer for Pipe Torsional Guided Wave Generation

Multi-belts Coil Longitudinal Guided Wave Magnetostrictive Transducer for Ferromagnetic Pipes Testing

Non-destructive Evaluation of Spiral-welded Pipes Using Flexural Guided Waves

Development of a Phased Array Flexible Rayleigh-wave Electromagnetic Acoustic Transducer for Pipe Inspection

An Enhanced Long-Range Guided-Wave Pipe Inspection Method Based on Local Axial 2-D Signal Acquisition and Processing.

Research on Broadband Electromagnetic Acoustic Transducer for Pipe Structure Health Monitoring

Extending the Incidence Angle of Shear Vertical Wave Electromagnetic Acoustic Transducer with Horizontal Magnetization.

Internal and External Pipe Defect Characterization via High-Frequency Lamb Waves Generated by Unidirectional EMAT

Excitation of Axisymmetric and Non-Axisymmetric Guided Waves in Elastic Hollow Cylinders by Magnetostrictive Transducers

Development of a new EMAT for multi-helical SH guided waves based on magnetostrictive effect

A New Omni-Directional EMAT Using Contra-flexure Coils for Plate Inspection

An Emat Design with Track Coil and Periodic Permanent Magnets for Enhanced Ultrasonic Lamb Wave Generation in Non-Ferromagnetic Plates