Abstract:Abstract This paper analyses the flow characteristics and oil-air distributions of oil flows in a tilting-pad journal bearing under different bearing loads. This titling-pad journal bearing is working at 3000 rpm rotation speed and its minimum film thicknesses have been measured under different loads from 180 kN to 299 kN. Based on the previous researches of this bearing under 180 kN, the gaseous cavitation and low-turbulence flow exists in this bearing flow. A suitable gaseous cavitation model and the SST model with low-Re correction are used in the film flow simulations. With the rotor and pads assumed to be rigid, the dynamic mesh and motion equations are applied to simulate the motions of the rotor and the rotations of the pads. Based on the simulation results under different bearing loads, the simulated minimum film thicknesses agrees well with the measured data. It indicates that the simulation results can catch the film geometries and flows correctly. With the load increasing, the rotor moves closer to the loaded pads and the minimum film thickness decreases. Taking the effect of boundary layers into consideration, the turbulence has a negative relationship with the film thickness and decreases in the loaded area under higher bearing load. It can be verified by the simulated lower turbulent viscosity ratio distributions in the loaded pads. In the unloaded area, both the film thickness and turbulence viscosity ratio are positively related to the bearing loads. Thus, the higher bearing load may lead the flow to be more different in the loaded and unloaded area, and the turbulence in the loaded pads may transfer to laminar in the end. As for the oil-air distributions, in the unloaded pads, with the bearing load increasing, the simulated air volume fraction increases in the unloaded pads with lower pressure. It should be caused by the higher film thickness of the unloaded pads under higher loads. In sum, the flow turbulence and cavitation process changes with the bearing load. With a higher load, the cavitation becomes more in the unloaded pads and the flow changes sharper from the high-turbulence unloaded area to the low-turbulence loaded area. As the simulation results is in good accordance with the experimental data, the SST model with low-Re correction and the gaseous cavitation model are verified to be suitable for bearing film simulations under different loads.

CFD analysis of the load capacity and oil feeding characteristics of floating bush bearings with bush rotation being considered

Numerical simulation of flow and heat transfer in journal bearing lubrication

Investigation Of Air-Oil-Thermal Distribution In Floating Bush Bearings

Lubrication and stability analysis of nonlinear rotor-bearing system

Application of CFD analysis for rotor-bearing system-double oil grooved round bearing

Development and Validation of a Three-Dimensional Computational Fluid Dynamics Analysis for Journal Bearings Considering Cavitation and Conjugate Heat Transfer

Application of CFD analysis for journal bearing considering cavitation effects

Influence of Cavitation Pressure on Performance of Sliding Bearings

Numerical Investigation for Characteristics and Oil-Air Distributions of a Tilting-Pad Journal Bearing Under Different Loads

Cavitation Model for Oil Film Bearings

Motion Modelling of the Floating Bushing in an External Gear Pump Using Dimensional Analysis

Numerical Investigation for Characteristics and Oil–air Distributions of Oil Film in a Tilting-Pad Journal Bearing

CFD analysis for static and dynamic characteristics of hydrodynamic thrust bearings

Application of CFD Analysis for Rotating Machinery—Part I: Hydrodynamic, Hydrostatic Bearings and Squeeze Film Damper

CFD Simulation of Connecting Rod Bearing Lubrication

Numerical Investigation of Subsynchronous Vibration in Floating Ring Bearings

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

Application of Computational Fluid Dynamics and Fluid Structure Interaction Techniques for Calculating the 3d Transient Flow of Journal Bearings Coupled with Rotor Systems

Numerical Investigation of Air–Oil–Thermal Coupling Mechanism in Floating Ring Bearings

Analysis for the Fluctuation Characteristics of Annular Flow in the Oil-Air Lubrication System

Oil film boundary analysis of spiral oil wedge sleeve bearing based on the dynamic loading conditions