Abstract:This study focuses on the frictional pressure drop in gas-liquid two-phase flow, characterized by nonlinear behavior under various flow conditions due to complex two-phase phenomena. The experimental investigation involves an air-oil mixture flowing through horizontal pipes with diameters of 20 mm and 40 mm, aiming to observe the flow patterns and quantify the pressure drop. Two oils with different thermophysical properties are used as the liquid phase. The operating temperature and pressure of the test pipes are controlled within the range of 24–44°C and 1–3 bar, respectively. Seven air-oil flow patterns are identified based on visualization results: stratified smooth, stratified wavy, annular, plug, slug, bubbly, and dispersed bubble flows. On analyzing 1043 data points from the experiment, this study explores the effects of total mass velocity, flow quality, pipe diameter, operating temperature, operating pressure, and oil type on the frictional pressure gradient. Particular attention is given to the variation of the frictional pressure gradient concerning operating pressure, and its relationship with total mass velocity, flow quality, and flow pattern is discussed. Additionally, the study examines predictions from 55 previous correlations against the current pressure drop data. The predictive capability of these correlations is evaluated for the entire dataset and its subsets, categorized by oil type, pipe diameter, operating pressure, flow condition, total mass velocity, flow quality, and flow pattern. Evaluation metrics include mean absolute errors and the proportions of data points within 30% and 50% of absolute error. In addition, average and standard deviation values are calculated for each dataset to provide a comprehensive assessment.

Analysis for the Fluctuation Characteristics of Annular Flow in the Oil-Air Lubrication System

Numerical Analysis Of Noise Radiation Of Compressor Shell Considering Lubrication Oil

Analysis on the oil film uniformity of hydro-viscous drive friction pairs

Numerical simulation of flow and heat transfer in journal bearing lubrication

Numerical Investigation on Flow Pattern of Air-Oil with Different Viscosities Lubrication

Research on Flow Characteristics of Air-oil Two Phase Annular Flow for Oil-air Lubrication

Analysis of the oil supply system of a high-pressure shell scroll compressor

Lubrication and stability analysis of nonlinear rotor-bearing system

Experimental Investigation on Air-Water Two-Phase Flow Pattern and Pressure Drop in Vertical Upward Annulus

Influence of Nozzle Structure on the Two-phase Flow Characteristic in Oil-air Lubrication System for High-speed Rolling Bearing

Transient CFD Modelling of Air–Water Two-Phase Annular Flow Characteristics in a Small Horizontal Circular Pipe

Numerical Investigation for Characteristics and Oil–air Distributions of Oil Film in a Tilting-Pad Journal Bearing

Analysis of Circulation Characteristics and Heat Balance of High-Speed Rolling Bearing under Oil-Air Lubrication

The Study Of Rheological Behavior Of Annular Clearance Thinking Account Of Oil-Flow Inertia

CFD analysis of the load capacity and oil feeding characteristics of floating bush bearings with bush rotation being considered

Analysis on the Lubrication Performances of Journal Bearing System Using Computational Fluid Dynamics and Fluid–structure Interaction Considering Thermal Influence and Cavitation

Computational Fluid Dynamics Analysis on Oil Pumping System for Rolling Piston Compressors

Characteristic Flow Parameters of Oil/Air Lubricants in Bearing Chamber Under Different Flow Patterns

Internal Flow and Cavitation Analysis of Scroll Oil Pump by CFD Method

Study on the Hydrodynamic Performance and Stability Characteristics of Oil-Water Annular Flow Through a 90° Elbow Pipe

An experimental study on pressure drop of air-oil flow in horizontal pipes using two synthetic oils