Abstract:Computational methods were used to analyse the elasto-hydrodynamic lubrication of a complex rotor–bearing system. The methodology employed computational fluid dynamics (CFD), based on the Navier–Stokes equation and a fluid–structure interaction (FSI) technique. A series of models representing the system were built using the CFD–FSI methodology to investigate the interaction between the lubrication of the fluid film, and elastic dynamics of the rotor and journal bearing. All models followed an assumption of isothermal behaviour. The FSI methodology was implemented by setting nodal forces and displacements to equilibrium at the fluid–structure interface, therefore allowing the lubrication of the fluid and the elastic deformation of structures to be solved simultaneously. This is significantly different to the more common techniques—such as the Reynolds equation method—that use an iterative solution to balance the imposed load and the force resulting from the pressure of the fluid film to within a set tolerance. Predictions using the CFD–FSI method were compared with the results of an experimental study and the predictions from an ‘in-house’ lubrication code based on the Reynolds equation. The dynamic response of the system was investigated with both rigid and flexible bodies for a range of different bearing materials and dynamic unbalanced loads. Cavitation within the fluid film was represented in the CFD–FSI method using a simplified phase change boundary condition. This allowed the transition between the liquid and vapour phases to be derived from the lubricant’s properties as a function of pressure. The combination of CFD and FSI was shown to be a useful tool for the investigation of the hydrodynamic and elasto-hydrodynamic lubrications of a rotor–bearing system. The elastic deformation of the bearing and dynamic unbalanced loading of the rotor had significant effects on the position of its locus.

Application of CFD Analysis for Rotating Machinery—Part I: Hydrodynamic, Hydrostatic Bearings and Squeeze Film Damper

Numerical simulation of flow and heat transfer in journal bearing lubrication

Study on Flow Field in Capacity Regulating Actuator for Reciprocating Compressor

Numerical Modeling of the Flow in the Squeeze Film Dampers with Oil Feed Groove by Computational Fluid Dynamic Analysis

Application of CFD analysis for rotor-bearing system-double oil grooved round bearing

Application of Computational Fluid Dynamics and Fluid Structure Interaction Techniques for Calculating the 3d Transient Flow of Journal Bearings Coupled with Rotor Systems

CFD analysis for static and dynamic characteristics of hydrodynamic thrust bearings

Application of CFD analysis for journal bearing considering cavitation effects

Lubrication Analysis of Journal Bearing and Rotor System Using Cfd and Fsi Techniques

Analysis on the Lubrication Performances of Journal Bearing System Using Computational Fluid Dynamics and Fluid–structure Interaction Considering Thermal Influence and Cavitation

A New Method for Studying the 3D Transient Flow of Misaligned Journal Bearings in Flexible Rotor-Bearing Systems

Analysis of the Flow Dynamics Characteristics of an Axial Piston Pump Based on the Computational Fluid Dynamics Method

Development and Validation of a Three-Dimensional Computational Fluid Dynamics Analysis for Journal Bearings Considering Cavitation and Conjugate Heat Transfer

A New Dynamic Mesh Algorithm for Studying the 3D Transient Flow Field of Tilting Pad Journal Bearings

Application of Computational Fluid Dynamics and Fluid–Structure Interaction Method to the Lubrication Study of a Rotor–Bearing System

Stiffness and Damping Coefficients for Journal Bearing Using the 3d Transient Flow Calculation

Numerical Calculation of Fluid Film Force on Journal Bearings Based on a Biconjugate Gradient-Stabilized Algorithm

Numerical analysis of sliding bearing dynamic characteristics based on CFD

A Thermohydrodynamic Analysis of the Self-Lubricating Bearings Applied in Gear Pumps Using Computational Fluid Dynamics Method

CFD Simulation of Air Ingestion in a Squeeze Film Damper

Numerical Investigation of Turbulence Models for a Superlaminar Journal Bearing