Abstract:Pulsed power systems can deliver high peak power in a micro/nano-second timescale to various loads in scientific and industrial applications, whose performances are significantly influenced by the pulsed discharge switch. This article presents the development and comprehensive tests of a miniaturized sealed-off pseudospark switch. The structure of double-gap and multi-channel is adopted to achieve the high hold-off voltage and high current capacity. In single pulse tests, the influence of pressure in the switch is analyzed. As the pressure increases, values of multiple parameters decrease, like self-breakdown voltage, trigger delay, and voltage dropping time. In a wide pressure range, trigger jitter is below 3 ns, and the minimum is <1 ns. At low pressure, the transient voltage across two gaps becomes inconsistent, and two types of current quenching are observed, which are related to processes occurring on cathode surface. In repetitive pulse tests, the direct repetitive operation is up to 3.5 kHz while higher repetition rate is limited by the trigger system. In double-pulse tests, the maximum repetition rate can be higher than 8 kHz for 40 kV pulsed voltage. Meanwhile, the insulation recovery speed is higher at lower pressure, and as the time delay between two pulses increases, the second pulse breakdown voltage increases nonlinearly. In high current tests, the switch is also used in metal wire explosion experiments and operates at the condition of 30 kV/40 kA for more than 104 shots without performance degradation. Further lifetime tests point out that the switch can work for >106 shots stably at moderate current. Experiments prove that the designed switch has superior performances including high hold-off voltage (>50 kV), low jitter (<1 ns), high repetition rate (>3.5 kHz), high peak current (>40 kA), long lifetime (>106 shots) and miniaturized size.

A Micro-Machined Pulsed Power Switch Based on Kapton Films

Design and fabrication of micro planar gas spark switch

Investigation on a Novel Multiple-Switch Pulsed Power Technology

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

Design, Simulation, and Characterization of a Low-Cost In-Plane Spark Gap Microswitch with Dual-Trigger Electrode for Pulsed Power Applications.

Novel Multiple-switch Pulsed Power Technologies

A Miniaturized Sealed-Off Double-Gap Pseudospark Switch for High Power and High Repetition Rate Pulsed Discharge Applications

A Shock-Induced Pulsed Power Switch Utilizing Electro-Explosion of Exploding Bridge Wire

Design, Fabrication, and Characterization of a Planar Three-Electrode Trigger Switch Based on Flexible Printed Circuit Process

Development of P-C Switch with Adjustable Gap

Repetitive high-power discharge operation of a micro-laser triggered gas switch

Sealed-off Pseudospark Switches for Pulsed Power

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium- and low-voltage pulse power systems

Firing Performance of Microchip Exploding Foil Initiator Triggered by Metal-Oxide-Semiconductor Controlled Thyristor

Development of Automatic Nanosecond Risetime High-voltage Recatangular Pulse Generator Based on Dielectric Foil Switch

Pulsed Corona Generation Using a High-Power Semiconductor Diode Switch

Design and Characteristics of a High Current Two-Electrode Graphite Gas Switch for the ICF Power System

A Nanosecond High Voltage Pulse Source Based on Magnetic Switch

On the Design of a Fast Mechanical Switch-Based Amplified Piezoelectric Actuator

Novel Multicontact Radio Frequency Microelectromechanical System Switch in High-Power–handling Applications