Abstract:The correct electric power fluctuation process of a wind farm is essential for the operation and studying of the power grid integrated with wind power. A complete wind energy conversion model, that should take both the spatial effects and the overall effect of all the pitch angle controllers into account, is required to convert the wind fluctuation into the electric power fluctuation. Although some equivalent models have been proposed in previous studies, there is no simple solution for equivalently modeling the non-synchronous actions of the pitch angle controllers in individual wind turbine generators. This study found the relationship between the overall effect of all the pitch angle controllers and the spatial effects of the wind farm and presented a theoretical derivation of the frequency-domain equivalent modeling method. The proposed modeling method is the simplest way to obtain the equivalent model of the complete wind energy conversion process of a wind farm with consideration of all the spatial effects and the overall effects of all the pitch angle controllers. The only input signal of the proposed equivalent model is the speed of the wind before entering the wind farm, which is called the "original incoming wind speed" and the only output signal is the total power of the wind farm. In this proposed equivalent modeling method, a discrete transfer function for representing both the wind energy conversion process, and all the spatial effects of a wind farm, can be obtained, first through a wind process below the rated wind speed. Second, a compensation factor for calculating a "compensation wind speed" of the original incoming wind can be obtained through a wind process that partly exceeds the rated wind speed. Using this compensation wind speed, a compensation power with negative values can be obtained to represent the total reduced power caused by the pitch angle controllers in individual wind turbine generators. A frequency-domain equivalent model has been identified and validated by field measurements of an actual wind farm. The normalized root-mean-squared error of the model is less than 8% over the entire wind process, and the maximum error of the power ramp rate in 10 min is less than 5 MW. Finally, an example is provided to demonstrate the online use of the proposed model to convert the forecasted wind speed into output power of a wind farm in ultrashort-term wind power forecast.

Partial Element Equivalent Circuit Model of Inductosyn

Practical Induction Motor Model with Consideration of Frequency Variation

Phase–amplitude Model for Doubly Fed Induction Generators

Equivalent Modeling of Wind Energy Conversion Considering Overall Effect of Pitch Angle Controllers in Wind Farm

A Dynamic Equivalent Method for Doubly-fed Induction Generator Wind Farm Based on the Thevenin Equivalent Circuit

Simplified Modeling of Power Electronic Interfaced Load Considering Harmonics

A Physics-Aware Methodology for Equivalent Circuit Model Extraction of TSV-inductors

Quasi-Static Derived Physically Expressive Circuit Model for Lossy Integrated RF Passives

A derived circuit model for spiral inductors on lossy silicon substrate

Modeling a current source push-pull resonant converter for loosely coupled power transfer systems

A Novel Analytical Model for Current Harmonics Prediction of Interior PM Machines Based on Differential Evolution Algorithm

Analytical Model for the Equivalent Impedances of the Domestic Induction Heating System with Rectangular Cross‐sectional Windings

PEEC Modeling and Model Order Reduction of Magnetically Enhanced Planar Inductive Device

An Analytical Calculation Model for Inductances of Multi-Unit PMSM with Concentrated Windings

Equivalent Physical Model of Modular Multilevel Converter Considering Internal Dynamics

FE-based equivalent circuits for simulating transformer internal faults

Modeling of Magnetic Elements Including Losses—Application to Variable Inductor

Mathematical Models of Specific Elements of Wind Energy Conversion Systems Based on Induction Generator

Mathematical Model and Equivalent Circuit for Three-phase Three-limb Transformer Based on Magnetic Circuit Characteristics

An Equivalent Model of Wind Farms for Torsional Vibration Analysis

An Equivalent Model of Doubly-Fed Wind Generation System