Abstract:In this study, with the meso-scale model reliably validated in our previous work (Construction and Building Materials, 2018), the waveform features of plain concrete under various loading conditions and especially with considering stress non-equilibrium are reliably reproduced and predicted. Associating with waveform features, the violation indicator of the specimen stress equilibrium in the split Hopkinson pressure bar test is identified for concrete-like damage softening materials. The concrete material behaviors for stress non-equilibrium are further analyzed, e.g. the dynamic increase factor (DIF) and damage development, etc. The conception of "damage failure volume" is introduced, and a new method of defining the development of concrete dynamic damage is given in the numerical study. What's more, the "compression wave" and "double peak" phenomena observed in the experiment are further interpreted based on the means of numerical simulation. Waveform features how to reflect the concrete material properties is also concluded. The results show that, the disappearance of the "double peak" phenomenon of reflection curve under high strain rate can be regarded as the indicator of the violation of stress equilibrium. After the violation of the stress equilibrium, the relevant DIFs of the concrete specimen will not change significantly. Especially, the concrete specimen will turn into structural response from material response. The conception of "damage failure volume" can well explain the generation of the "double peak" phenomenon of the reflection curve. The "compression wave" phenomenon of reflection curve under lower strain rates is derived from the unloading expansion recovery of the concrete specimen. Furthermore, under the same loading condition, the amplitude of the first peak of the reflection curve can be used as the evaluation standard of the bonding quality between mortar and aggregates.

Experimental Study on Working Stress Measurement of Concrete by Grooving Method

Experimental Study on Measuring the Steel Stress via FBG Sensors

Experimental research on the working stress of measurement on concrete by the ring-hole method

Study on Measurement Method of Interior Stress Distributions in Engineering Rolled-Plates

Research on In Situ Stress Measurements in Reinforced Concrete Beams Based on the Core-Drilling Method

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Study on Real-Time Reinforcement Stress Measurement Based on Brillouin Optical Time Domain Analysis

Test study on the bond stress-slip relationship between concrete and steel bars

Test Study on Bond Stress-Slip Relationship of Concrete and Steel Bar

New Method of Measuring the Real Stress of Reinforced Concrete

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Stress analysis of concrete slab in high CFRD and measures for improving the stress state

Modelling of creep effect on moisture warping and stress developments in concrete pavement slabs

The Performance Analysis of Grouting Repair Effect on the Accuracy of Disturbance Stress Test in Damaged Surrounding Rock Mass

Determination of stress relaxation parameters of concrete in tension at early-age by ring test

Research on the Carbonation Model of Stress Concrete Components

Measurement and Modeling of Creep Property of High-Strength Concrete Considering Stress Relaxation Effect

Methodology of Obtaining Intrinsic Creep Property of Concrete by Flexural Deflection Test

EXPERIMENTAL AND NUMERICAL ANALYSIS OF EARLY-AGE STRESS IN CONCRETE DIAPHRAGM WALL OF UNDERGROUND STRUCTURES

A New Experimental Method of Concrete Complete Direct Tensile Stress-strain Curve

Further numerical investigation on concrete dynamic behaviors with considering stress non-equilibrium in SHPB test based on the waveform features