Abstract:With the increasing attention on oceanography, more effective exploration technology has been of great interests in the community of ocean engineering. Side-scan sonar is a popular imaging equipment for seabed topography; however, it is commonly used under 4 knots, which does not meet the actual demand of the modern oceanographic research. This paper proposes a high-speed side-scan sonar imaging scheme based on multi-beam forming technology. In this scheme, the digital signal processing system can adjust the maximum response direction of the receiving array by introducing appropriate phase shift or time delay to the output, so as to increase the scanning range and then improve operation efficiency. In order to verify the feasibility of this imaging algorithm, an ocean environment model is constructed, which simulates the acoustic propagation theory, the principle of seabed acoustic backscattering and the acoustic signal modulation method. After analyzing the acoustic characteristics of uniform linear array, an underwater acoustic transducer with multiple receiving subarrays is designed. In the process of simulated navigation, the receiving subarrays will generate the electrical signal containing seabed acoustic information. Based on the simulation signal, the parameters of the digital filter in the actual system can be determined in advance, which provides convenience for later processing. The time delay matrix of each receiving channel based on dynamic focusing beamforming method can be verified by imaging the seabed model. The processed acoustic data are combined with GPS information and heading angle to generate seabed scanning image in the host computer system. This paper mainly presents the imaging algorithm of multi-beam side-scan sonar digital signal processing system.

Modelling and Simulation of Laser Imaging System Based on Linear Array Detection

The Staring Imaging Laser Radar Based on Plane Array Detector

Airborne Laser Communication System with Automated Tracking

An Imaging Algorithm for High-speed Side-scan Sonar Based on Multi-beam Forming Technology

Intelligent Measuring System for Performance Parameters of Laser Range Finder

A Binary Beam-Splitter For Lidar Beam-Shaping In Laser Imaging Application - Art. No. 66241j

Development of Visible-Light Optical Simulator Based on Liquid Crystal on Silicon Technology

Modeling and simulation analysis of a non-line-of-sight infrared laser imaging system

Verification and analysis of stray light in high-power laser system

Analysis of Multiplex Laser Scanning Imagery Optical System

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

A Hybrid Solid-State Beam Scanner for FMCW LiDAR Application.

A simulation imaging method for actual optical system and results analysis

Stray Light Analysis And Calculation Modeling Of Optical System

High speed multi-beam photon-counting Lidar system

Stray light simulation and control in imaging systems including diffraction elements

A Hybrid Solid-State Beam Scanner for LiDAR Applications

Full-Waveform Modeling for Time-of-Flight Measurements based on Arrival Time of Photons

Simulation of Fraudulent Jamming for Laser Final Guidance Shell

Design of Laser-Synchronized Scanning System for Linear Array LiDAR

A Simulation Design Based On The Six Quadrants Laser Detection System