Abstract:In the field of robotic hands, finger force coordination is usually achieved by complex mechanical structures and control systems. This study presents the design of a novel transmission system inspired from the physiological concept of force synergies, aiming to simplify the control of multifingered robotic hands. To this end, we collected human finger force data during six isometric grasping tasks, and force synergies (i.e., the synergy weightings and the corresponding activation coefficients) were extracted from the concatenated force data to explore their potential for force modulation. We then implemented two force synergies with a cable-driven transmission mechanism consisting of two spring-loaded sliders and five V-shaped bars. Specifically, we used fixed synergy weightings to determine the stiffness of the compression springs, and the displacements of sliders were determined by time-varying activation coefficients. The derived transmission system was then used to drive a five-finger robotic hand named SYN hand. We also designed a motion encoder to selectively activate desired fingers, making it possible for two motors to empower a variety of hand postures. Experiments on the prototype demonstrate successful grasp of a wide range of objects in everyday life, and the finger force distribution of SYN hand can approximate that of human hand during six typical tasks. To our best knowledge, this study shows the first attempt to mechanically implement force synergies for finger force modulation in a robotic hand. In comparison to state-of-the-art robotic hands with similar functionality, the proposed hand can distribute humanlike force ratios on the fingers by simple position control, rather than resorting to additional force sensors or complex control strategies. The outcome of this study may provide alternatives for the design of novel anthropomorphic robotic hands, and thus show application prospects in the field of hand prostheses and exoskeletons.

Dimensional Synthesis Optimization of Wearable Master Device with Force Feedback

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

An Exoskeleton Force Feedback Master Finger Distinguishing Contact and Non-Contact Mode

Mechanism Design and Optimization of a Haptic Master Manipulator for Laparoscopic Surgical Robots.

Mechanical design, modeling, and identification for a novel antagonistic variable stiffness dexterous finger

Preserving Real-World Finger Dexterity Using a Lightweight Fingertip Haptic Device for Virtual Dexterous Manipulation

Design of an Underactuated Finger Based on a Novel Nine-Bar Mechanism

Fusing Topology Optimization and Pseudo-Rigid-Body Method for the Development of a Finger Exoskeleton

Design and Testing of a Self-Adaptive Prosthetic Finger with a Compliant Driving Mechanism.

Three Degree-of-Freedom Soft Continuum Kinesthetic Haptic Display for Telemanipulation Via Sensory Substitution at the Finger

A Data-Driven Design Framework for Structural Optimization to Enhance Wearing Adaptability of Prosthetic Hands

Design of a Novel Force Feedback Dataglove Based on Pneumatic Artificial Muscles

Synthesis of a single-degree-of-freedom noncircular pulley-five-bar finger rehabilitation mechanism considering force transfer performance

Towards humanlike grasp in robotic hands: mechanical implementation of force synergies

Human Finger Mechanical Impedance Modeling: Using Multiplicative Uncertain Model

Structure Design and Research of Dexterous Finger Based on the SMA Driver

Multisensory Integrated Dexterous Finger With Coupled-Adaptive Features

Development of a Novel Driving Mode of Dexterous Finger

Biomechatronic Approach to a Multi-Fingered Hand Prosthesis

Kinematics and dynamics of a tendon-driven prosthetic finger

Analysis and Performance Evaluation of a Modular Finger-Mounted Haptic Device for High-Density Feedback