Abstract:Virtual reality technology brings a new experience to human-computer interaction, while wearable force feedback devices can enhance the immersion of users in interaction. This paper proposes a wearable fingertip force feedback device that uses a tendon drive mechanism, with the aim of simulating the stiffness characteristics of objects within virtual scenes. The device adjusts the rotation angle of the torsion spring through a DC motor, and then uses a wire to convert the torque into a feedback force at the user's index fingertips, with an output force of up to 4 N and a force change rate of up to 10 N/s. This paper introduces the mechanical structure and design process of the force feedback device, and conducts a mechanical analysis of the device to select the appropriate components. Physical and psychological experiments are conducted to comprehensively evaluate the device's performance in conveying object stiffness information. The results show that the device can simulate different stiffness characteristics of objects, and users can distinguish objects with different stiffness characteristics well when wearing the force feedback device and interacting with the three-dimensional virtual environments.
nanoscience & nanotechnology,instruments & instrumentation,physics, applied,chemistry, analytical
What problem does this paper attempt to address?
### Problems the paper attempts to solve
This paper aims to solve the problem of how to simulate the hardness of objects through wearable fingertip force - feedback devices when users interact with three - dimensional virtual environments in virtual reality technology. Specifically, the paper proposes a wearable fingertip force - feedback device based on the tendon - driven mechanism to enhance users' immersion in virtual scenes and enable them to perceive virtual objects of different hardness.
### Background and motivation
Virtual Reality (VR) technology provides users with an immersive experience by simulating scenes and sounds in the environment. However, in order to further enhance this immersion, force - feedback technology needs to be introduced so that users can touch, perceive and operate virtual objects. Most of the existing force - feedback devices are installed on fixed surfaces, which limits users' flexibility. Hand - held force - feedback devices are suitable for two - dimensional scenes, but cannot achieve free grasping and touching of the hand. Therefore, the development of a lightweight, flexible and wearable device that can provide accurate force - feedback has become the focus of research.
### Device design and principle
The paper proposes a wearable fingertip force - feedback device based on the tendon - driven mechanism, with the following main features:
1. **Mechanical structure**:
- The main components of the device include motors, screws, nuts, torsion springs and ropes.
- The motor is connected to the screw through a coupling to control the rotation of the screw, thereby driving the nut to move along the screw.
- The movement of the nut drives one arm of the torsion spring to rotate, generating torque.
- The torque is transmitted to the user's fingertip platform through the rope to provide feedback force.
2. **Mechanical analysis**:
- By establishing a mathematical model, the relationship between the rope tension and the nut displacement is analyzed.
- The key parameters include the short torque arm length \( L_L \), the long torque arm length \( L_R \), the initial position vertical distance \( H \) and the rope initial position vertical distance \( X \).
- The force - feedback performance is described by the following formula:
\[
F_{r\alpha} = \frac{k_s (\arctan(\frac{D_{s\beta}}{L_R}) + \theta_{r\alpha})}{L_L \cos(\theta_{r\alpha} + \arctan(\frac{L_L (1 - \cos \theta_{r\alpha})}{H - L_L \sin \theta_{r\alpha}}))} \cdot \frac{180}{\pi}
\]
- Where \( k_s \) is the stiffness coefficient of the torsion spring, \( \theta_{r\alpha} \) is the rotation angle of the short torque arm, and \( D_{s\beta} \) is the displacement of the nut.
3. **Component selection**:
- In order to meet the performance requirements of the device, appropriate motors, screw pitches and torsion spring stiffness coefficients are selected.
- The motor is the RE10 series DC motor of Maxon Company, with a rotation speed of 780 rpm, paired with a screw with a pitch of 6 mm.
- The material of the torsion spring is carbon steel, with an elastic modulus \( E = 194,000 \) MPa, a wire diameter \( d = 1.2 \) mm, a medium diameter \( D_m = 5.0 \) mm, and the number of turns \( n = 3 \), and the calculated stiffness coefficient \( k_s = 6.1 \).
### Experimental verification
The paper comprehensively evaluates the performance of the device through physical experiments and psychological experiments. The results show that the device can simulate virtual objects of different hardness, and users can well distinguish objects of different hardness when wearing the force - feedback device and interacting with three - dimensional virtual environments.
### Conclusion
The wearable fingertip force - feedback device proposed in this paper successfully simulates the hardness characteristics of virtual objects through the tendon - driven mechanism, enhancing users' immersion and interactive experience in virtual reality environments.