Abstract:An optimal solution to the task-space tracking problem using a non-redundant manipulator is proposed. This is a recurring occurrence in automated manufacturing settings, e.g. welding, deburring, painting, or quality control inspections. Given a pre-defined path for the end-effector to follow, there may not exist a joint-space continuous solution for task-space tracking when the non-linear manipulator kinematics and collision avoidance with obstacles in the workcell are considered. This introduces undesirable manipulator reconfigurations where the end-effector is required to deviate temporarily from the pre-defined path. The unwanted motion results in pausing task-space tracking, often incurring not only ineffective time and energy demands but potentially compromising the quality of the task at hand due to the additional discontinuities. An algorithm is proposed that provides a globally optimal perspective to the choice of suitable joint-space connected segments so that the minimum number of manipulator reconfigurations during task-space tracking is guaranteed. By carefully selecting the inverse kinematic solutions, all sequences ensuring minimum reconfigurability are proven collected by Dynamic Programming. Moreover, a faster greedy strategy is suggested to increase the computational efficiency of the tracker whilst still preserving global optimality and completeness. The effectiveness of the proposed algorithm is validated against traditional sampling-based solvers in simulation and illustrated on challenging real-world tracking experimentation with a Universal Robotics manipulator and a curved-surface object, depicted also in an accompanying video. An open-source implementation has also been provided for the benefit of the robotics community.

Dimensional synthesis of spatial manipulators for velocity and force transmission for operation around a specified task point

Object Variation Oriented Kinematics Optimization Design for Manipulator

Dimensional Synthesis of a 3-DOF Parallel Manipulator

Dimensional Synthesis and Dynamic Manipulability of a Planar Two-Degree-of-freedom Parallel Manipulator

Optimal Task-Space Tracking with Minimum Manipulator Reconfiguration

Kinematics, dynamics and dimensional synthesis of a novel 2-DoF translational manipulator

Dimension Optimization Of An Orientation Fine-Tuning Manipulator For Segment Assembly Device

Enumeration of spatial manipulators by using the concept of Adjacency Matrix

Determination of the Link Lengths for a Spatial 3-DOF Parallel Manipulator

Dynamic Manipulability and Optimization of A Two Dof Parallel Mechanism

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

Dimensionally Homogeneous Jacobian using Extended Selection Matrix for Performance Evaluation and Optimization of Parallel Manipulators

Optimizing the kinematic chains for a spatial parallel manipulator via searching the desired dexterous workspace

Dimension optimization of an orientation fine-tuning manipulator for segment assembly robots in shield tunneling machines

Workspace optimization of 1T2R parallel manipulators with a dimensionally homogeneous constraint-embedded Jacobian

Dimension Synthesis of a Spatial Parallel Kinematic Manipulator Based on S-shaped Test Specimen

Dimensional synthesis of a 5-DOF hybrid robot

Dimension optimization of a planar 3-RRR parallel manipulator considering motion and force transmissibility

Dynamic Manipulability and Optimization of a Redundant Three DOF Planar Parallel Manipulator

Multi-objective Generative Design Framework and Realization for Quasi-serial Manipulator: Considering Kinematic and Dynamic Performance

A New Method for Optimum Design of Parallel Manipulator Based on Kinematics and Dynamics