Abstract:Abstract When the fine-blanking process is used, secondary grinding or processing can be omitted because the shear surface of fine-blanking parts can achieve almost zero fracture zone requirements. The primary objective of the fine-blanking process is to reduce the fracture zone depth and die roll zone width. This study used a 2.5-mm-thick central processing unit (CPU) thermal heat spreader as an example. Finite element analysis software was employed to simulate and optimize the main eight process parameters that affect the fracture zone depth and die roll zone width after fine-blanking: the V-ring shape angle, V-ring height of the blank holder, V-ring height of the cavity, V-ring position, blank holder force, counter punch force, die clearance, and blanking velocity. Simulation analysis was conducted using the L 18 (2 1 × 3 7 ) Taguchi orthogonal array experimental combination. The simulation results of the fracture zone depth and die roll zone width were optimized and analyzed as quality objectives using Taguchi’s smaller-the-better design. The analysis results revealed that with fracture zone depth as the quality objective, 0.164 mm was the optimal value, and counter punch force made the largest contribution of 25.89%. In addition, with die roll zone width as the quality objective, the optimal value was 1.274 mm, and V-ring height of the cavity made the largest contribution of 29.45%. Subsequently, this study selected fracture zone depth and die roll zone width as multicriteria quality objectives and used the robust multicriteria optimal approach and Pareto-optimal solutions to perform multicriteria optimization analysis. The results met the industry’s fraction zone depth standard (below 12% of blank thickness) and achieved a smaller die roll zone width.

An Investigation of Fineblanked Surface of Cold-Rolled 45 Steel

An Investigation of Step-Shaped-punch Fine-Blanking Process Using Finite Element Method

Numerical simulation of fine-blanking process using a mixed finite element method

Finite element optimization of veering factor in fine-blanking process

A Study of Fine Blanking Process by Fem Simulation

Optimum clearance determination in blanking coarse-grained non-oriented electrical steel sheets: experiment and simulation

State-of-the-art and Future Challenge in Fine-Blanking Technology

A Microstructure-Based Macro-Micro Multi-Scale Fine-Blanking Simulation of Ferrite-Cementite Steels

Formability of the Heat-Assisted Fine-Blanking Process for 304 Stainless Steel Plates

Numerical simulation and optimization of fine-blanking process for copper alloy sheet

Numerical simulation and optimization of process parameters in fineblanking process

Numerical Simulation of Fine-Blanking Shaping and Fracture of AISI-1035 Steel

Grain Size Effect on Optimum Clearance Determination in Blanking Non-Oriented Electrical Steel Sheet

A Novel Force Variation Fine Blanking Process for the High-strength and Low-plasticity Material

Research on Material Selecting and Heat Treatment of Plate Metal Fine-blanking Die

Simulated Analysis and Experimental Investigation on Edge Qualities of High Strength Steels Hot Blanking Parts

Numerical Simulation on Reciprocated Fine Blanking Process

Ductile Fracture in Fine-Blanking Process

Effect of Blanking on Magnetic and Mechanical Properties of Non-Oriented Electrical Steel

Advances in Forming Simulation for Fine-Blanking Process

An Improved Ductile Fracture Criterion for Fine-Blanking Process