Abstract:The paper presents the design of a six-axis machining system and its application in fabricating large off-axis aspherical mirrors with sub-aperture lapping techniques. The new system is based on computer-controlled optical surfacing (CCOS), which combines the faculties of grinding, polishing, and on-machine profile measuring, has the features of conventional loose abrasive machining with the characteristics of a tool having multiple degrees of freedom moving in planar model. And a novel dual touch-trigger probe profiler is designed, which is composed of a probe, model METRO-MT60 made by HEIDENHAIN Co., is integrated into the system for measuring the shape accuracy of the tested aspherical surface, another probe modeled METRO-MT12 is designed as a calibrating device for minimizing the cosine error caused by assembly inaccuracy. The new CNC machining system with two kinds of moving coordinate systems, dual tool activities and on-machine measuring is presently developed based on the new concept. The general material removal function during machining is analyzed on the basis of the Preston hypothesis. Further, an alignment test of the measuring profiler is carried out using a leveling rule as a specimen. The accuracy of the optical surfaces measured by the dual probe profiler is found to be within 1μm PV after removing cosine error and error compensating, achieves to the resolving power of the profiler is about 0.2–0.5μm, so the developed system can be applied to the shape accuracy measuring of aspheric fabrication with micro precision during fine grinding process according to the calibrating results. Finally, the manufacturing experiments are carried out by virtue of an off-axis oblate ellipsoid mirror with rectangular aperture as 770mm×210mm and centered 127mm. The accuracy of the aspherical mirror improved from the initial form error of 17.648μmrms to the final one of 0.728μmrms after grinding for 200h.

Ultra Precision Surface Grinding for Large Scale Non-Axisymmetric Aspheric Lens

Ultra-precision Single-point Grinding Technique and Profile Error Compensation Method for Machining Aspheric Mould

Development of Ultra-Precision Grinding Process for Aspheric Surface Based on Feed Rate Controlling and Error Compensation Methods

One-Point Nano-Grinding for Micro-Aspherical Glass Lens Mould

Fabrication of Microglass Lens Mould by Using Ultraprecision Microgrinding Process

Ultraprecision Fabrication of Large Stamping Die of Wolter Mirror for an X-Ray Telescope by ELID Grinding

An on-line measuring technique for lapping large aspherical mirror

Ultra-precision raster grinding of monocrystalline silicon biconical free-form optics using arc-shaped diamond grinding wheels

Ultra-Precision Cutting Of Fresnel Lenses On Single Crystal Germanium And The Machining Processing Analysis

Research on Precision Grinding Processing and Compensation Finishing Experiment for Mid-Large- Aperture Square Aspheric Optical Element

Discussions on On-Machine Measurement of Aspheric Lens-Mold Surface

A New Diamond Machining Approach for Extendable Fabrication of Micro-Freeform Lens Array

Development of Ultra-Precision Machine for Large-Sized Mirror Surface

Process Chain for Ultra-Precision and High-Efficiency Manufacturing of Large-Aperture Silicon Carbide Aspheric Mirrors

Development of a High-Speed Precision Ultrasonic-Assisted Spindle for Ultra-Precision Optical Mold Machining

Systematic Modeling and Rapid Control for Diamond Machining of Periodical Optical Surface

Ultra-precision raster grinding biconical optics with a novel profile error compensation technique based on on-machine measurement and wavelet decomposition

Ultra-precision Machining of Hard and Brittle Materials with Coarse-Grained Grinding Wheels

Ultra-precision grinding of monocrystalline silicon cylindrical mirror

Material removal and surface generation mechanisms in rotary ultrasonic vibration–assisted aspheric grinding of glass ceramics

Design of a six-axis high precision machine tool and its application in machining aspherical optical mirrors