Abstract:Structural Health Monitoring, Ahead of Print. Rub-impact is a common nonlinear fault of the rotor system, occurring in rotating machines with radial clearance between the rotor and the stator, which may lead to serious consequences. Since the vibration response of rotor rub-impact is shown as multicomponent with time-varying characteristics of undulatory instantaneous frequency, it is desired to exploit advanced signal processing methods for rub-related feature excavation and failure diagnosis under complex noise interferences, which is of crucial significance to ensure the stable and efficient operation of the whole unit. This paper concerns the processing of acceleration signals and proposes a novel intrawave frequency modulation detection approach for structural rotor rubbing diagnosis based upon targeted component extraction and stochastic resonance enhancement. First, the acquired vibratory acceleration signal is converted into displacement signal via a two-stage integration strategy. Next, to extract the rotating frequency component of high information clarity for further time–frequency analysis from the multicomponent signal, an especially designed improved variational mode decomposition method based on the modified target frequency index is put forward, and the instantaneous frequency of the objective component is estimated. Then, the optimum stochastic resonance is leveraged for intrawave frequency modulation enhancement. Finally, the rotor rub-related symptom can be distinctly revealed and the diagnostic procedure can be performed. The effectiveness and superiority of the proposed rotor rub-impact diagnosis approach are demonstrated through both simulations and experiments, indicating that it is suitable to be implemented in practical applications, with high noise-resistance ability, and can efficiently extract the potential characteristics of rotor rub-impact malfunction from multicomponent signals.

Experimental study on rubbing position locating for rotor-bearing system based on rubbing acoustic emission

Experimental Study on Rubbing Acoustic Emission for Rotor-Bearing System Based on Parameter Analysis

Modal Analysis of Rubbing Acoustic Emission for Rotor-Bearing System Based on Reassigned Wavelet Scalogram

EXPERIMENTAL DETERMINATION OF THE RUBBING LOCATION BY MEANS OF ACOUSTIC EMISSION AND WAVELET TRANSFORM

Acoustic emission technique based rubbing identification for Rotor-bearing systems

Application Of Acoustic Emission Technique In Diagnostics Of Early Rubbing Fault

Recognition method for rotor system under full annular rub and partial rub

Feature Extraction of Rubbing Fault Based on AE Techniques

Detection of the Rubbing-Caused Impacts for Rotor–stator Fault Diagnosis Using Reassigned Scalogram

Application of Acoustic Emission Technique in Diagnosis of Early Rolling Bearing Faults

Study on the Diagnosis of Rub-Impact Fault Based on Finite Element Method and Envelope Demodulation

Defect Diagnosis for Rolling Element Bearings Using Acoustic Emission

Experimental Study on Condition Diagnosis of Sliding Bearings Based on Acoustic Emission Detection

DETERMINATION OF THE RUBBING LOCATION IN A MULTI-DISK ROTOR SYSTEM BY MEANS OF DYNAMIC STIFFNESS IDENTIFICATION

An energy track method for early-stage rub-impact fault investigation of rotor system

Vibration Response Analysis of Rubbing Faults on a Dual-Rotor Bearing System

Genetic Algorithms Based Rubbing Location Identification in A Rotor System

REVIEW OF DIAGNOSIS OF ROLLING ELEMENT BEARINGS DEFAULTS BY MEANS OF ACOUSTIC EMISSION TECHNIQUE

Structural rotor rub-impact diagnosis under intricate noise interferences based on targeted component extraction and stochastic resonance enhancement

Fusion Fault Diagnosis Approach to Rolling Bearing with Vibrational and Acoustic Emission Signals

Study on the Propagation Characteristics of Acoustic Emission in Point Contact Bearing Ball