Abstract:Rubbing between the rotor and the stator is the frequent and harmful malfunction in the rotating machinery, which will cause a very serious accident, even catastrophe, to the machine. Thus, such fault needs timely detection to avoid severe consequences. Vibration based methods are the traditional ones for the detection and diagnosis of the rubbing fault, which are effective when the rubbing has been severe, but always do not work in early detection of such fault. Rubbing between the rotor and the stator will cause elastic strain in the rubbing location and thus can produce acoustic emission (AE). Apparently, such AE contains direct and abundant information about the rubbing and thus can be used to detect and diagnose such fault effectively. In this paper, the AE based method is proposed for detecting and identifying the rubbing of the rotor-bearing system. Using the modal acoustic emission (MAE) theory and reassigned wavelet scalogram, the present study emphasizes on modal analysis and time-frequency characteristics analysis for further understanding the characteristics, phenomenon, and features of the rubbing AE. The results show that the rubbing AE is the elastic wave with multiple modals, which has an impact characteristic and mainly consists of the flexural wave and extensional wave. The transmission of the rubbing AE has some directivity. Moreover, different modals have different transmission characteristics: The flexural wave has lower frequency and its attenuation is influenced mainly by the sectional area of the transmission passage. The extensional wave has higher frequency and its attenuation is mainly sensitive to the interface transmission between the two surfaces. The results also reveal that the reassigned wavelet scalogram is more effective than its original scalogram for the characteristic analysis of the rubbing AE.

EXPERIMENTAL DETERMINATION OF THE RUBBING LOCATION BY MEANS OF ACOUSTIC EMISSION AND WAVELET TRANSFORM

Experimental study on rubbing position locating for rotor-bearing system based on rubbing acoustic emission

Acoustic emission technique based rubbing identification for Rotor-bearing systems

Application Of Acoustic Emission Technique In Diagnostics Of Early Rubbing Fault

Experimental Study on Rubbing Acoustic Emission for Rotor-Bearing System Based on Parameter Analysis

Modal Analysis of Rubbing Acoustic Emission for Rotor-Bearing System Based on Reassigned Wavelet Scalogram

Using Acoustic Emission and Vibration Detection to Identify the Rotor-Stator Rubbing

Rubbing Fault Diagnose of Tilting Pad Journal Bearing by Acoustic Emission

Application of Acoustic Emission Technique in Diagnosis of Early Rolling Bearing Faults

The Wavelet Transform in the Acoustic Emission Signal Feature Extraction of the Rubbing Fault

Bearing Fault Detection Based on Empirical Wavelet Transform and Correlated Kurtosis by Acoustic Emission.

Feature Extraction of Rub-impact Acoustic Emission Based on Cluster Analysis

DETERMINATION OF THE RUBBING LOCATION IN A MULTI-DISK ROTOR SYSTEM BY MEANS OF DYNAMIC STIFFNESS IDENTIFICATION

Feature Extraction of Rubbing Fault Based on AE Techniques

Research on Feature Extraction Method Based on Rub-Impact Acoustic Emission Signals of Mechanical Seal End Faces

The relationship between acoustic emissions and wear particles for repeated dry rubbing

Bearing Fault Detection Based on Acoustic Emission Technique

Wavelet-Enhanced Time-Frequency Analysis Method for Bearing Fault Detection of Rotating Machinery

Fusion Fault Diagnosis Approach to Rolling Bearing with Vibrational and Acoustic Emission Signals

Feature Research Of Ae Signals From Rubbing Rotor Based On Multiscale Entropy

Vibration Response Analysis of Rubbing Faults on a Dual-Rotor Bearing System