Abstract:Rubbing between the rotor and the stator is the frequent and harmful malfunction in the rotating machinery, which will cause a very serious accident, even catastrophe, to the machine. Thus, such fault needs timely detection to avoid severe consequences. Vibration based methods are the traditional ones for the detection and diagnosis of the rubbing fault, which are effective when the rubbing has been severe, but always do not work in early detection of such fault. Rubbing between the rotor and the stator will cause elastic strain in the rubbing location and thus can produce acoustic emission (AE). Apparently, such AE contains direct and abundant information about the rubbing and thus can be used to detect and diagnose such fault effectively. In this paper, the AE based method is proposed for detecting and identifying the rubbing of the rotor-bearing system. Using the modal acoustic emission (MAE) theory and reassigned wavelet scalogram, the present study emphasizes on modal analysis and time-frequency characteristics analysis for further understanding the characteristics, phenomenon, and features of the rubbing AE. The results show that the rubbing AE is the elastic wave with multiple modals, which has an impact characteristic and mainly consists of the flexural wave and extensional wave. The transmission of the rubbing AE has some directivity. Moreover, different modals have different transmission characteristics: The flexural wave has lower frequency and its attenuation is influenced mainly by the sectional area of the transmission passage. The extensional wave has higher frequency and its attenuation is mainly sensitive to the interface transmission between the two surfaces. The results also reveal that the reassigned wavelet scalogram is more effective than its original scalogram for the characteristic analysis of the rubbing AE.

Feature Extraction of Rubbing Fault Based on AE Techniques

Application Of Acoustic Emission Technique In Diagnostics Of Early Rubbing Fault

A New Procedure for Extracting Fault Feature of Multi-Frequency Signal from Rotating Machinery

Feature Extraction Of Impulse Faults For Vibration Signals Based On Sparse Non-Negative Tensor Factorization

Fault Feature Extraction of Rolling Element Bearing Based on Morphological Undecimated Wavelet Decomposition

Acoustic emission technique based rubbing identification for Rotor-bearing systems

Fault Feature Extraction Method for Rotor System Under Radial Impact Based on BF-HHT

Rolling Bearing Fault Feature Extraction Based on Morphological Wavelet and S-transform

Modal Analysis of Rubbing Acoustic Emission for Rotor-Bearing System Based on Reassigned Wavelet Scalogram

Experimental Study on Rubbing Acoustic Emission for Rotor-Bearing System Based on Parameter Analysis

A Method of Bearing Fault Feature Extraction Based on Improved Wavelet Packet and Hilbert Analysis

Experimental study on rubbing position locating for rotor-bearing system based on rubbing acoustic emission

Rotational Machine Health Monitoring and Fault Detection Using Emd-Based Acoustic Emission Feature Quantification

Wavelet Function Suitable for Fault Feature Extraction of Acoustic Emission Signal

Application of Acoustic Emission Technique in Diagnosis of Early Rolling Bearing Faults

Rotor Broken Bar Fault Diagnosis of Induction Motors Based on Feature Frequency Extraction of the Electromagnetic Torque Signal

Application of AE Techniques for the Detection of Wind Turbine Using Hilbert-Huang Transform

Instantaneous Amplitude-Frequency Feature Extraction for Rotor Fault Based on BEMD and Hilbert Transform

USING WAVELET METHOD TO ANALYZE FAULT FEATURES OF RUB ROTOR IN GENERATOR

Research on Feature Extraction Method Based on Rub-Impact Acoustic Emission Signals of Mechanical Seal End Faces

Acoustic Emission Signal Feature Extraction for Bearing Faults Using ACF and GMOMEDA