Abstract:To solve problems existing in conventional transformer backup protection, such as increasing complexity of setting calculation, extending time delay of protection operation, and aggravating deficiency on sensitivity, a novel transformer local backup protection scheme and corresponding setting calculation method were proposed. Dual setting distance relays with forward and reverse direction operation characteristics were employed in each circuit breaker of protected transformer. Impedance setting of distance relays ensured sensitivity requirement, and selectivity requirement was satisfied through time setting coordination. So complexity of setting calculation for transformer local backup protection was reduced. However, operating speed of the new simplified local backup protection scheme still needs further improvement under some circumstances. Therefore, a substation area backup relaying scheme was designed. Digital startup information of distance relays in local substation was utilized to judge faulted elements and accelerate circuit breaker tripping. Case study results show that substation area backup relaying scheme combined with transformer local backup protection realizes fault tolerance ability and unification of selectivity, sensitivity and quickness.

Automatic switchover theory of stand-by transformer and its influence on economic operation mode of distribution substation

Implementation Research on the Economic Operation Mode of Distribution Transformer

A Study on Effectiveness of Economical Operation Mode of Distribution Transformer Considering Life Expectancy Loss of Electric Equipment

On-Load Automatic Voltage Regulation System Designed Via Thyristor for Distribution Transformer

Research on Local Backup Protection of Transformer and Substation Area Backup Protection

Research on Unloaded Switching into Fault Protection for UHV Transmission Line

Optimal Operation of 2 Main Transformers with Two－winding

Research on the Transformerless Connection Mode for DC Power Distribution System

Optimum Model for Substation's Economical Capacity and the Configuration of Transformer under Different Load Density

Research on alteration of oil-filled transformer during transformation from 10 kV to 20 kV for power distribution network

Study on Distribution Transformers′ Switching Strategies with Consideration of Influence of Reactive Power Compensation

Control strategy of on-load tap-changer based on digital substation

Research on Optimized Decision-Making of Load Transfer under Transformer Fault in Power Grid

Study on the Operating Characteristics of a Compound Automatic Transfer Switch Based on Forced Current Commutation

Three-Phase Imbalance Management and Economic Operation for Distribution Area with Natural Ester Insulating Transformers

Research on Typical Power Supply Modes of Middle and Low Voltage Transformer Areas at Home and Abroad

Economic, Safe and Optimized Strategy of Operation of Transformer in Parallel Considering the Hot-Spot Temperature

Development and Application of Load Transfer Auxiliary Decision-making System in Distribution Grid

The Loss Analysis and Research of Power Plant's Connecting Transformer

Transient Analysis on Transfer Process of Hybrid Soft Open Point under Power Grid Outage

Automatic Switchover Device Adaptive to Distribution Line Non-Communication Protection