Abstract:The fundamental prompt neutron delayed constant α , the effective delayed neutron fraction βeff , and the effective neutron generation time Λeff are important for accurate measurements of k eff in subcritical systems. In this paper, based on the open-source program OpenMC, a module with the function of calculating the α -eigenvalue is developed based on the k- α iterative method. Based on the nodal expansion method (NEM), an adjoint neutron flux calculation program was developed, which in turn used the idea of coupling the k- α iterative method with the NEM to obtain the neutron kinetics parameters ( α , βeff , and Λeff ) of the subcritical system and allowed for a more accurate k eff under the subcritical system as compared to the traditional k-mode program. In this paper, the results of the α -eigenvalues calculated by the program are validated using the Godiva benchmark and the MUSE-4 device as computational objects. The accuracy of the results for βeff and Λeff was verified with the KUCA (Kyoto University Critical Assembly) benchmark. The results of the k eff calculations using k-mode and α -mode are compared with the ADS benchmark. The results show that the calculation program (α-mode) can obtain k eff under the subcritical system more accurately, which makes up for the shortcomings of the traditional program, which cannot be calculated under the deep subcritical system. The relative error between the calculated and reference values was less than 750 pcm at deep subcriticality (k eff = 0.899). The error was less than 400 pcm at the deeper subcritical system (k eff = 0.952), which can satisfy the demand for neutron dynamics parameters and k eff calculation in the subcritical system. The program can also continue to be upgraded in the later stage in the calculation method and other aspects.

A measurement method for effective delayed neutron fraction

Monte Carlo Approach of Effective Delayed Neutron Fraction by k-Ratio Method with External Neutron Source

Measurements of effective delayed neutron fraction in a fast neutron reactor using the perturbation method

Development and Verification of Neutron Kinetics Parameter Calculation Program Applicable to Subcritical Systems of Long-Life Reactors

Development of a method for measuring the effective fraction of delayed neutrons using a 240Pu spontaneous fission source

Calculation of Reactor Kinetic Parameters with Monte Carlo Method

Research on the Measurement Method of the Prompt Neutron Decay Constant Based on LHS-DMD-Rossi-Alpha

Investigations of reactivity worth measurement in a fast neutron reactor with the inverse kinetics method

A keffcalculation method by Monte Carlo

On the Feynman-alpha Method for Reflected Fissile Assemblies

Measurement of Dynamic Parameter of Sub-Critical Facility with Rossi-α Method

The Experimental Determination Of The Fraction Of Neutrons Below 1.5 Mev For The Chinese-Made Am-Be Neutron Source

Neutron Generation Based Method for Monte Carlo Three-Dimensional Reactor Time-Dependent Simulation

Target Accuracy Assessment for China Experimental Fast Reactor Based on Subspace Method

Mechanism Analysis of the Contribution of Nuclear Data to the Keff Uncertainty in the Pebble Bed HTR

Research on perturbation based Monte Carlo reactor criticality search

Improvement of Discontinuity Factor for Strong Absorber Region

Experimental Determination of Fraction of Neutrons Below 1.5MeV for Am-Be Neutron Source

First Application of Large Reactivity Measurement through Rod Drop Based on Three-Dimensional Space-Time Dynamics

Research of Calculation Method of Assembly Equivalence with Boundary Flow Response Matrix

Treatments of Thermal Neutron Scattering Data and Their Effect on Neutronics Calculations