Abstract:The fundamental prompt neutron delayed constant α , the effective delayed neutron fraction βeff , and the effective neutron generation time Λeff are important for accurate measurements of k eff in subcritical systems. In this paper, based on the open-source program OpenMC, a module with the function of calculating the α -eigenvalue is developed based on the k- α iterative method. Based on the nodal expansion method (NEM), an adjoint neutron flux calculation program was developed, which in turn used the idea of coupling the k- α iterative method with the NEM to obtain the neutron kinetics parameters ( α , βeff , and Λeff ) of the subcritical system and allowed for a more accurate k eff under the subcritical system as compared to the traditional k-mode program. In this paper, the results of the α -eigenvalues calculated by the program are validated using the Godiva benchmark and the MUSE-4 device as computational objects. The accuracy of the results for βeff and Λeff was verified with the KUCA (Kyoto University Critical Assembly) benchmark. The results of the k eff calculations using k-mode and α -mode are compared with the ADS benchmark. The results show that the calculation program (α-mode) can obtain k eff under the subcritical system more accurately, which makes up for the shortcomings of the traditional program, which cannot be calculated under the deep subcritical system. The relative error between the calculated and reference values was less than 750 pcm at deep subcriticality (k eff = 0.899). The error was less than 400 pcm at the deeper subcritical system (k eff = 0.952), which can satisfy the demand for neutron dynamics parameters and k eff calculation in the subcritical system. The program can also continue to be upgraded in the later stage in the calculation method and other aspects.

Measurement of Dynamic Parameter of Sub-Critical Facility with Rossi-α Method

Monte Carlo simulations and experimental validations of α eigenvalues

Monte Carlo Simulations of Reactor α Eigen-Values

Experimental Study Using Touschek Lifetime As Machine Status Flag in SSRF

A Method of Measuring Αc on Fast Neutron Reactor

Calculation of Reactor Kinetic Parameters with Monte Carlo Method

Development and Verification of Neutron Kinetics Parameter Calculation Program Applicable to Subcritical Systems of Long-Life Reactors

Research on the Measurement Method of the Prompt Neutron Decay Constant Based on LHS-DMD-Rossi-Alpha

Measurement of Prompt Neutron Decay Constant on Uranium-Plutonium Metal Assembly

Monte Carlo Approach of Effective Delayed Neutron Fraction by k-Ratio Method with External Neutron Source

A Practical Subcritical Rod Worth Measurement Technique Based on the Improved Neutron Source Multiplication Method

Time Sequence Method for Prompt Neutron Decay Constant Determination

APPLICATION OF THE DYNAMIC ROD WORTH MEASUREMENT METHOD ON WWER

Investigation of MA Content Effect on Kinetic Parameter in ADS Core

Study on dynamic character of thermohydraulic test system of 5MW low temperature nuclear heating reactor

Application of Monte Carlo Method to Solve the Neutron Kinetics Equation for a Subcritical Assembly

Reactivity Measurement at VENUS-II During Control Rods Drop Based on Inverse Kinetics Method

A New Strategy for Validating Transient Neutronic Solver Using the Measurement Data During the Dynamic Rod Worth Measurement Process

A new dynamic rod worth measurement method based on the transient spatial factor

Study of Minor Actinides Effect on Kinetic Parameters and Reactivity Coefficients in an Accelerator Driven System

Measurement and Adjustment of Neutron Flux Spectrum on Shielding-Experimental Reactor of Tsinghua University