Abstract:The fundamental prompt neutron delayed constant α , the effective delayed neutron fraction βeff , and the effective neutron generation time Λeff are important for accurate measurements of k eff in subcritical systems. In this paper, based on the open-source program OpenMC, a module with the function of calculating the α -eigenvalue is developed based on the k- α iterative method. Based on the nodal expansion method (NEM), an adjoint neutron flux calculation program was developed, which in turn used the idea of coupling the k- α iterative method with the NEM to obtain the neutron kinetics parameters ( α , βeff , and Λeff ) of the subcritical system and allowed for a more accurate k eff under the subcritical system as compared to the traditional k-mode program. In this paper, the results of the α -eigenvalues calculated by the program are validated using the Godiva benchmark and the MUSE-4 device as computational objects. The accuracy of the results for βeff and Λeff was verified with the KUCA (Kyoto University Critical Assembly) benchmark. The results of the k eff calculations using k-mode and α -mode are compared with the ADS benchmark. The results show that the calculation program (α-mode) can obtain k eff under the subcritical system more accurately, which makes up for the shortcomings of the traditional program, which cannot be calculated under the deep subcritical system. The relative error between the calculated and reference values was less than 750 pcm at deep subcriticality (k eff = 0.899). The error was less than 400 pcm at the deeper subcritical system (k eff = 0.952), which can satisfy the demand for neutron dynamics parameters and k eff calculation in the subcritical system. The program can also continue to be upgraded in the later stage in the calculation method and other aspects.

Application of Monte Carlo Method to Solve the Neutron Kinetics Equation for a Subcritical Assembly

Application of Monte Carlo Methods to Neutron Space-Time Kinetics

Monte Carlo Approach of Effective Delayed Neutron Fraction by k-Ratio Method with External Neutron Source

Dynamic Monte Carlo Method for Nuclear Reactor Kinetics Calculations

Neutron Generation Based Method for Monte Carlo Three-Dimensional Reactor Time-Dependent Simulation

Calculation and Transient Analysis of Neutron Time-space Kinetics for Accelerator Driven Sub-critical System

Monte Carlo Neutron-Kinetics Analysis in Continuous Time and Energy

An application of direct statistical method for kinetics parameters in TMSR-SF1

Application of Monte Carlo Method to Reactor Calculation

Application of Monte-Carlo method to reactor calculation

Simulation Analysis of Neutron Time-space Kinetics for ADS Sub-critical Reactor Based on IQS/MC Method

An Accurate Solution of Point Kinetics Equations of One-Group Delayed Neutrons and an Extraneous Neutron Source for Step Reactivity Insertion

Development and Verification of Neutron Kinetics Parameter Calculation Program Applicable to Subcritical Systems of Long-Life Reactors

Weighted Monte Carlo solution of neutron kinetics equations

Application of Monte Carlo Method in the Calculation of Nuclear Reactor Physics

Depletion calculation of subcritical system with consideration of spontaneous fission reaction

Calculation of Reactor Kinetic Parameters with Monte Carlo Method

Development and Verification of the Transient Fission Matrix Combination Method for the Efficient Neutron Kinetic Simulations

Multi-physics Coupled Analyzes of Research Nuclear Reactors Based on Steady-State and Kinetics Models

Kinetic Methods in Monte Carlo Code RMC and Its Implementation to C5G7-TD Benchmark

Monte-Carlo Methods for the Neutron Transport Equation