Abstract:The fundamental prompt neutron delayed constant α , the effective delayed neutron fraction βeff , and the effective neutron generation time Λeff are important for accurate measurements of k eff in subcritical systems. In this paper, based on the open-source program OpenMC, a module with the function of calculating the α -eigenvalue is developed based on the k- α iterative method. Based on the nodal expansion method (NEM), an adjoint neutron flux calculation program was developed, which in turn used the idea of coupling the k- α iterative method with the NEM to obtain the neutron kinetics parameters ( α , βeff , and Λeff ) of the subcritical system and allowed for a more accurate k eff under the subcritical system as compared to the traditional k-mode program. In this paper, the results of the α -eigenvalues calculated by the program are validated using the Godiva benchmark and the MUSE-4 device as computational objects. The accuracy of the results for βeff and Λeff was verified with the KUCA (Kyoto University Critical Assembly) benchmark. The results of the k eff calculations using k-mode and α -mode are compared with the ADS benchmark. The results show that the calculation program (α-mode) can obtain k eff under the subcritical system more accurately, which makes up for the shortcomings of the traditional program, which cannot be calculated under the deep subcritical system. The relative error between the calculated and reference values was less than 750 pcm at deep subcriticality (k eff = 0.899). The error was less than 400 pcm at the deeper subcritical system (k eff = 0.952), which can satisfy the demand for neutron dynamics parameters and k eff calculation in the subcritical system. The program can also continue to be upgraded in the later stage in the calculation method and other aspects.

A keffcalculation method by Monte Carlo

A New Monte Carlo Code For Nuclear Criticality Calculations

Method of Tallying Adjoint Fluence and Calculating Kinetics Parameters in Monte Carlo Codes

Monte Carlo Approach of Effective Delayed Neutron Fraction by k-Ratio Method with External Neutron Source

Calculation of Reactor Kinetic Parameters with Monte Carlo Method

Development and Verification of Neutron Kinetics Parameter Calculation Program Applicable to Subcritical Systems of Long-Life Reactors

Calculation of eigenfunction fluxes in nuclear systems

Combining Total Monte Carlo and Benchmarks for nuclear data uncertainty propagation on an LFRs safety parameters

A direct calculation method for subcritical multiplication factor in Reactor Monte Carlo code RMC

Depletion calculation of subcritical system with consideration of spontaneous fission reaction

Application of Monte Carlo Method in the Calculation of Nuclear Reactor Physics

One Step Method for Multigroup Adjoint Neutron Flux Through Continuous Energy Monte Carlo Calculation

Simulation of Neutron Multiplicity Counting Based on Monte Carlo Code RMC

Calculation of Adjoint-Weighted Kinetic Parameters with the Reactor Monte Carlo Code RMC

Application of Monte-Carlo method to reactor calculation

Monte Carlo Source Convergence Diagnosis Method and Thermal-Physics Coupling Method Based on Functional Expansion Tallies

Monte Carlo Method for Calculating Particle Radiation Detector Correction Factors

Application of Monte Carlo Method to Solve the Neutron Kinetics Equation for a Subcritical Assembly

Monte-Carlo Methods for the Neutron Transport Equation

Whole-core forward-adjoint neutron transport solutions with coupled 2-D MOC and 1-D SN and kinetics parameter calculation

Development of Multigroup Monte Carlo Neutron Transport Method with Regionwise Even-Parity Discontinuity Factor