Abstract:A thorough understanding of the reactor core thermal hydraulic behavior is essential for the design and safety analysis of Sodium-cooled Fast Reactors (SFR). Due to the application of hexagonal subassembly, the core thermal hydraulic behavior is significantly affected by the flow field within the subassemblies, the inter-wrapper region and the hot pool. Analysis of the core thermal hydraulic behavior requires a model coupling the three regions mentioned above, which has been identified as one of the thermal hydraulic challenges in SFR. In the present study, a 3D model that covers the three regions was developed for the core of the China Experimental Fast Reactor (CEFR) with the Computational Fluid Dynamic (CFD) code, Fluent. The inter-wrapper region and the hot pool were modeled in detail, while the subassemblies were modeled with a special porous medium model. The core thermal hydraulics behavior under steady state was studied, more specifically, information for the flow field distribution at the core outlet, the inter-wrapper flow and the duct wall temperature distribution was obtained. Under steady state, liquid sodium in the inter-wrapper region is supplied by the inner region of the hot pool. And it enters the inter-wrapper region from the core outer region and returns back to the hot pool inner region from the core central region. The inter-wrapper flow is cooled by non-fuel subassemblies and heated up by fuel subassemblies. For non-fuel subassembly, the ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies could reaches 96%; for fuel subassemblies, the maximum ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies is 2.45%. Significant temperature gradients have been observed on the duct wall, with maximum values of 156.69 K/m in the vertical direction and 2,196.00 K/m in the circumferential direction. The largest temperature gradient appears on the duct of subassemblies adjacent to the transition region of fuel subassemblies and non-fuel subassemblies.

Target Accuracy Assessment for China Experimental Fast Reactor Based on Subspace Method

Application and Validation of an Improved One-to-Many Method to CFETR Neutronics Modeling

Impact of the resonance elastic scattering on reactor-core physics calculation results based on the deterministic method

Uncertainty reduction of sodium void reactivity using data from a sodium shielding experiment

CROSS-EVALUATION OF HIGHLY ENRICHED METAL URANIUM FAST CRITICALITY EXPERIMENTS

Application of the First Collision Source Method to CSNS Target Station Shielding Calculation

An extension of NASCA for SDDR analysis of mobile activated components with global variance reduction

Nuclear Data Sensitivity and Uncertainty Analysis for Generalized Response with RMC Code

New Strategies for Quantifying and Propagating Nuclear Data Uncertainty in Cusa

Design and Evaluation of Mitigation Measures for Tsinghua High Flux Reactor Loss-of-Coolant Accidents

Numerical investigation on the core thermal hydraulic behavior of pool-type sodium-cooled fast reactor (SFR)

A practical methodology devoted to pool‐type phenomena simulation in safety analysis for sodium‐cooled fast reactor

Quantification of Control Rod Worth Uncertainties Propagated from Nuclear Data Via a Hybrid High-Order Perturbation and Efficient Sampling Method

RAPID LEAKAGE SOURCE RECONSTRUCTION METHOD BASED ON BACKWARD ATMOSPHERIC DISPERSION SIMULATION

Investigation of target in C-ADS and IAEA ADS benchmark

Thermal Hydraulic Analysis of China Spallation Neutron Source Target System Under Abnormal Situations

First Application of Large Reactivity Measurement through Rod Drop Based on Three-Dimensional Space-Time Dynamics

Uncertainty Analysis of Containment Dose Rate for Core Damage Assessment in Nuclear Power Plants

Monitoring method for neutron flux for a spallation target in an accelerator driven sub-critical system

Uncertainty Analysis of Core Power Distribution Monitoring System SMROMS