Abstract:MOCVD (Metal Organic Chemical Vapor Deposition) is a key means of heterojunction semiconductor material epitaxy, the uniformity of its epitaxial layer thickness will directly affect the yield of the product, especially the vertical cavity surface emitting devices, which have a higher requirement for thickness uniformity. For the multi-MO nozzle vertical reaction cavity MOCVD, this paper combines theory and experiment to give an effective method to improve the epitaxial layer thickness uniformity by adjusting the flow rate of each MO nozzle. Firstly, each MO source nozzle is equivalent to an evaporation surface source, and an equivalent height is introduced to cover the relevant epitaxial parameters of MOCVD and the quantitative relationship between the epitaxial layer thickness and the flow rate of each MO source nozzle is established by taking three MO source nozzles as an example. After that, the model parameters were extracted by fitting using the least squares method based on the experimentally measured epitaxial layer thickness distribution results. Finally, based on the extracted model parameters, a method to optimize the epitaxial layer thickness uniformity is given. Accordingly, the AlGaAs resonant cavity structure, which is easy to accurately test the thickness, was designed and epitaxially grown using the EMCORE D125 MOCVD system, and the statistical results of the mapping reflection spectra of the 4-inch epitaxial wafers were that the average wavelength of the cavity mode was 651.89 nm, with a standard deviation of 1.03 nm, and thickness uniformity of 0.16% was achieved. At the same time epitaxial growth of GaInP quantum well structure, 4-inch epitaxial wafers mapping Photoluminescence spectrum statistics for the average peak wavelength of 653.3 nm, the standard deviation of only 0.46 nm, and peak wavelength uniformity of 0.07%. Whether it is the cavity mode wavelength or quantum well peak wavelength uniformity, it fully meets the requirements of vertical cavity surface emitting devices. The method of adjusting epitaxial layer thickness uniformity proposed in this paper is simple, effective, and fast, and it can be further extended to vertical reaction cavity MOCVD systems with more than four MO nozzles.

Computational analysis of GaAs/AlGaAs deposition in MOCVD vertical rotating disk reactor

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Study on the optimization of the deposition rate of planetary GaN-MOCVD films based on CFD simulation and the corresponding surface model

Numerical Simulation of Gas Phase and Surface Reaction for Growth of GaN by MOCVD

CFD NUMERICAL SIMULATION AND OPTIMIZATION OF GAN-MOCVD REACTOR

Film Formation in a Horizontal Twin-Shaft Rotating Disk Reactor for Polymer Devolatilization

Modeling Of Two-Dimensional Dynamic Temperature Distribution Of A Lpcvd Process And Control Design By Mpc

CFD Simulation of Flow Patterns in GaN-MOCVD Reactor

Numerical Analysis of the Transport Phenomena in MOCVD Process

Modeling Analysis of the Mocvd Growth of Zno Film

Simulation and experimental verification study on the process parameters of ZnO-MOCVD

Simulation-Assisted Design of Metal Organic Chemical Vapor Deposition Reactor

Numerical Study on Chemical Vapor Deposition of ZrC and Optimization of Deposition Uniformity with Flexible Flow Controller

Numerical investigation of particle size distribution, particle transport and deposition in a modified chemical vapor deposition process

Effect of Microgroove Structures on the Fluid Dynamics and Film Conformality in Spatial Atomic Layer Deposition of Al2O3

Numerical study on jet effect in the vertical showerhead MOCVD reactor

Analysis of Temperature and Gas Flow Distribution in Chamber with Wafer Batch

Numerical Simulation Study on Chemical Reaction-transport Process of AlN MOCVD Growth

Computational Fluid Dynamics Modeling of Spatial Atomic Layer Deposition on Microgroove Substrates

Optimization Theory and Application of Epitaxial Layer Thickness Uniformity in Vertical MOCVD Chamber with Multiple MO Nozzles

Numerical Study of Heating Structure in Cold-Wall MOCVD Reactor by Induction Heating