Abstract:Titanium and titanium alloy materials are often made as medical implants. Surface properties of titanium medical implants play decisive roles for antibacterial and biological response and tissue biocompatibility. In this study, cathode arc evaporation (CAE) technology was used to deposit TiNb–Zr–Ta and nitrogen-doped TiNb–Zr–Ta coatings with nanostructures on the Ti–6Al–4V dental abutment screws. The deposited coatings were then oxidized at high temperature to produce different oxides on the surface of the coatings. The mechanical properties , antibacterial properties and biocompatibilities of the coatings were analyzed. The effect of coatings on the abutment screw loosening and removal torque between the abutment screw and the pure titanium implant fixture was studied by removal torque measurement. In addition, Staphylococcus aureus (S. aureus) was used for evaluating the antibacterial properties of coatings, and mouse fibroblasts (L929) were used for ISO 10993-5 cytotoxicity analyses to determine whether it had good biocompatibility. Nanolayered structures and multiphases of polycrystalline TiNb–Zr–Ta were obtained by co-deposition of Ta , Zr and TiNb. When small content of N was introduced, the TiNb–Zr–Ta(N) showed a polycrystalline TiNb–Zr–Ta where N atoms entered the metallic lattice at interstitial sites. After oxidation, oxide phases of Ta 2 O 5 , TiO 2 , Nb 2 O 5 and ZrO 2 were formed on the surface of TiNb–Zr–Ta and TiNb–Zr–Ta(N). Ta 2 O 5 was obtained on the surface of the coating prior to other oxides such as TiO 2 , Nb 2 O 5 and ZrO 2 . The deposited TiNb–Zr–Ta and TiNb–Zr–Ta(N) coatings had high contact angle and exhibited a hydrophobic feature, while the annealed TiNb–Zr–Ta–O and TiNb–Zr–Ta(N)–O showed hydrophilicity. The deposited TiNb–Zr–Ta had similar hardness and Young's modulus values to that of the uncoated Ti–6Al–4V. When N was doped, the TiNb–Zr–Ta(N) had the highest hardness and Young's modulus. The hardness of the annealed TiNb–Zr–Ta(N) coating only decreased slightly due to the small oxide layer of ∼140 nm. Compared with the uncoated Ti–6Al–4V, TiNb–Zr–Ta serial coatings deposited on abutment screws had higher removal torques, which prevented the abutment screw of dental implant from loosening after long-term use. The biocompatibility of TiNb–Zr–Ta serial coatings was similar to that of the uncoated Ti–6Al–4V. In addition, the oxidized TiNb–Zr–Ta and TiNb–Zr–Ta(N) coatings had excellent antibacterial properties. It is speculated that the resulting Ta 2 O 5 of both coatings may inhibit bacterial growth and improve the antibacterial effect. Based on the above advantages, the TiNb–Zr–Ta serial coatings are expected to have the potential to be applied to biomedical implants.

Preparation and Characterization of TaCxN1 − X Coatings on Biomedical 316L Stainless Steel

A Study of TaxC1−x Coatings Deposited on Biomedical 316L Stainless Steel by Radio-Frequency Magnetron Sputtering

Structure And Properties Of Tac(X) Coating On Biomedical 316l Stainless Steel By Rf Magnetron Sputtering

Characterization and blood compatibility of TiCxN1 - x hard coating prepared by plasma electrolytic carbonitriding

Microstructure, mechanical properties and tribo-corrosion mechanism of (CrNbTiAlVMo) x N 1-x coated 316 L stainless steel in 3.5 wt.% NaCl solution

Electrochemical Properties of a Novel Β-Ta2o5 Nanoceramic Coating Exposed to Simulated Body Solutions.

Tribological properties and microstructure of monolayer and multilayer Ta coatings prepared by magnetron sputtering

Microstructure and properties of monolayer, bilayer and multilayer Ta2O5-based coatings on biomedical Ti-6Al-4V alloy by magnetron sputtering

Microstructure and Properties of Monolayer Ta and Multilayer Ta/Ti/Zr/Ta Coatings Deposited on Biomedical Ti-6Al-4V Alloy by Magnetron Sputtering

Surface Composition and Corrosion Property of TiNi Alloys Coated with Tantalum Films

Bacteria Adherence Properties of Nitrogen-Doped Tio2 Coatings by Plasma Surface Alloying Technique

Investigation into Microstructure, Wear Resistance in Air and NaCl Solution of AlCrCoNiFeCTax High-Entropy Alloy Coatings Fabricated by Laser Cladding

THERMALLY OXIDIZED C, N CO-DOPED ANATASE-TiO2 COATINGS ON STAINLESS STEEL FOR TRIBOLOGICAL PROPERTIES

Mechanical Properties of Tin Coating on Nanocrystalline Surface Layer of 304 Stainless Steel

Mechanical, antibacterial and cytotoxic characteristics of nanolayered TiNb–Zr–Ta and nitrogen-doped TiNb–Zr–Ta coatings

Effect of Temperature Ramp Rate on the Morphology, Phase and Adhesion Strength of Ag-Ta2O5 Thin Film

High-Temperature Oxidation Behaviour of CrSi Coatings on 316 Austenitic Stainless Steel

Electrophoretic Deposition and Corrosion Resistance of TiB2-Chitosan Coating on 6Cr13 Martensitic Stainless Steel

Study on Deposition of Biomedical Ta Coating on Ti6Al4V Alloy Substrate by CVD and Its Properties

Study of CNx films on 316L stainless steel for orthodontic application

Comparison of TiN and CN Coatings on Orthodontic Stainless Steel: Tribological and Biological Evaluation