Abstract:A Hull cell was used to evaluate a chromium(III) plating bath based on the combination of oxalate and acetate anions. The bath contains chromium(III) sulfate, ammonium oxalate, sodium acetate, boric acid, potassium sulfate, sodium sulfate and sodium dodecyl sulfate (SDS). The working pH was 3.5, and all species were protonated. The chromium(III) plating bath had a faradaic efficiency of 37%, high covering power at 8.2 cm, low deposition potential of 7.3 V, and a deposition rate of 0.4 μm/min. Chromium coatings were obtained at a current density (30A/dm2). This chromium(III) plating bath is competitive considering the state of the art of the electrodeposition of Cr(III). SDS was used as a surfactant to prevent the formation of polymeric oxides (olation reactions) by decreasing the number of nearby ions of Cr(III). Boric acid successfully maintained the pH as a buffer because after 2 h of the electrodeposition process, the pH values change only 0.2 units. The bath was analyzed after electrolysis to check the formation of Cr(VI) ions, and after 2 h of electrodeposition, this cation was not detected. The voltammetry results showed a very high noise with a potential of -0.8 V due to the abundant bubbles that formed and suggest a reduction in a step from Cr(III) to Cr(0). In the literature, the use of oxalate anions is explained by the reaction of exchange of ligands between these anions and the water of the first solvation sphere of Cr(III). In our study, it is postulated that electrostatic interactions of ion-ions and ion-solvents should be very present, and that oxalate and acetate anions are very likely to be in the second sphere of solvation and not in the first as other authors propose. The water molecules in the first solvation sphere are very stable and difficult to replace because they are exposed to two opposite electrostatic forces at their ends.

Three-phase Electrode and its Application in Studies of Chromium(Ⅵ)Ion Transfer Across the Liquid/liquid Interface

EIS Investigation of the Deposition of Trivalent Chromium Coatings on Al 6063 Alloy

A Miniaturized Electrochemical System for High Sensitive Determination of Chromium(vi) by Screen-Printed Carbon Electrode with Gold Nanoparticles Modification

Charge Transfer Across the Water/Nitrobenzene Interface by Three-Electrode System

Towards cleaner production of trivalent chromium electrodeposition: Mechanism, process and challenges

Studies on the stripping voltammetric determination and speciation of chromium at a rotating-disc bismuth film electrode

A green rust-coated expanded perlite particle electrode-based adsorption coupling with the three-dimensional electrokinetics that enhances hexavalent chromium removal

Separation and Recovery of Cr(Iii) and Cr(Vi) Using Electrodeionization As an Efficient Approach

Study of facilitated potassium ion transfer across a water \ 1,2-dichloroethane interface using different phase volume ratio systems

Fabrication of Nanoscale Electrochemical Interface and the Direct Determination of Theophylline

Two New Devices for Identifying Electrochemical Reaction Intermediates with Desorption Electrospray Ionization Mass Spectrometry.

Three-phase interface-assisted advanced electrochemistry-related applications

Cathode/Anode Electrodes for Large-Area Bifunctional Electrochemical Devices Prepared by a Novel Na3Cit-assisted Chemical Deposition Method

Study on the Electrodeposition of Chromium from Cr(III) Solution in the Presence of Oxalate and Acetate Anions

Electrodeposition of Ni from Choline Chloride/Ethylene Glycol Deep Eutectic Solvent and Pure Ethylene Glycol

Study of single-metal multi-nanometer electrodeposition chromium layer

Investigation of the Electrochemical Processes Related to It Coupling with Et by Hydrophilic Droplet Electrodes

Electrodeposition of Nanocrystalline Chromium Coatings from 1-Butyl-3-methylimidazolium-hydrogen Sulfate Ionic Liquid

Graphene-modified graphite paper cathode for the efficient bioelectrochemical removal of chromium

Efficient Removal of Chromium(VI) Using a Novel Waste Biomass Chestnut Shell-Based Carbon Electrode by Electrosorption

Studies of effect of phase volume ratio on transfer of ionizable species across the water/ 1,2-dichloroethane interface by a three-electrode setup.