Graphene-modified graphite paper cathode for the efficient bioelectrochemical removal of chromium

Jiani Yao,Ying Huang,Yang Hou,Bin Yang,Lecheng Lei,Xianjin Tang,Kirk G Scheckel,Zhongjian Li,Di Wu,Dionysios D Dionysiou,Kirk G. Scheckel,Dionysios D. Dionysiou

DOI: https://doi.org/10.1016/j.cej.2020.126545

IF: 15.1

2021-02-01

Chemical Engineering Journal

Abstract:<p>Metal-free electrocatalysts have been widely used as cathodes for the reduction of hexavalent chromium [Cr(VI)] in microbial fuel cells (MFCs). The electrocatalytic activity of such system needs to be increased due to the low anodic potential provided by bacteria. In this study, graphite paper (GP) was treated by liquid nitrogen to form three-dimensional graphite foam (3DGF), improving the Cr(VI) reduction by 17% and the total Cr removal by 81% at 30 h in MFCs. X-ray absorption spectroscopy confirmed the Cr(VI) reduction product as Cr(OH)₃. Through the spectroscopy characterizations, electrochemical measurements, and density functional theory calculations, the porous structures, edges, and O-doped defects on the 3DGF surface resulted in a higher electro-conducting rate and a lower mass transfer rate, which provide more active sites for the Cr(VI) reduction. Additionally, the scrolled graphene-like carbon nanosheets and porous structures on the 3DGF surface might limit the OH⁻ diffusion and result in a high local pH, which accelerated the Cr(OH)₃ formation. The results of this study are expected to provide a simple method to manipulate the carbon materials and insights into mechanisms of Cr(VI) reduction in MFCs by the 3DGF with <em>in situ</em> exfoliated edges and O-functionalized graphene.</p>

engineering, chemical, environmental

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the method for efficiently removing hexavalent chromium (Cr(VI)) in microbial fuel cells (MFCs). Specifically, the author prepared three - dimensional graphite foam (3DGF) by liquid nitrogen treatment and used it as a cathode material for the bioelectrochemical reduction of Cr(VI), aiming to improve the reduction efficiency of Cr(VI) and the removal rate of total chromium. Although traditional methods such as adsorption, precipitation, chemical precipitation and solvent extraction can remove chromium, they usually require pH adjustment and the addition of chemical reagents, resulting in high operating costs and a large amount of sludge production. In contrast, electrochemically reducing Cr(VI) to less toxic and less water - soluble trivalent chromium (Cr(III)) through MFCs is a more effective method. However, because the potential provided by bacteria at the anode is low, there is an urgent need to develop cathode materials with high conductivity and electrocatalytic activity to improve the reduction efficiency of Cr(VI) and the overall performance of MFCs. In this paper, 3DGF was prepared from improved graphite paper (GP), and its effectiveness and mechanism for Cr(VI) removal in MFCs were explored.