Abstract:Abstract Background Although microbial fuel cells (MFCs) represent a promising technology for capturing renewable energy from wastewater, their scaling-up is significantly limited by a slow-rate cathodic oxygen reduction reaction (ORR) and the development of a resilient anodic microbial community. In this study, mixed transition metal oxides of nickel and copper (Ni and Cu), supported on a graphene (G) (NiO–CuO/G) electrocatalyst, were synthesized and tested as a cost-effective cathode for ORR in MFCs. Electrochemical measurements of electrocatalyst were conducted using a rotating disk electrode (RDE) and linear sweep voltammetry (LSV) in a neutral electrolyte, and compared with a benchmark Pt/C catalyst. Furthermore, the long-term performance of the as-synthesized electrocatalyst was evaluated in a single-chamber MFC by measuring organic matter removal and polarization behavior. The successful enrichment of electroactive biofilm was also monitored using transmission electron microscopy and the Vitek2 compact system technique. Results When compared with the benchmark platinum cathode, the NiO–CuO/G electrocatalyst exhibited high selectivity toward ORR. The rotating disk electrode (RDE) experiments reveal that ORR proceeds via a 4-electron ORR mechanism. Furthermore, the NiO–CuO/G electrocatalyst also exhibited a high power density of 21.25 mW m −2 in an air-cathode MFC, which was slightly lower than that of Pt/C-based MFC (i.e., 50.4 mW m −2 ). Biochemical characterization of the most abundant bacteria on anodic biofilms identified four genera (i.e., Escherichia coli , Shewanella putrefaciens , Bacillus cereus , and Bacillus Thuringiensis/mycoides ) that belonged to Gammaproteobacteria , and Firmicutes phyla. Conclusions This study demonstrates that the NiO–CuO/G cathode had an enhanced electrocatalytic activity toward ORR in a pH-neutral solution. This novel mixed transition metal oxide electrocatalyst could replace expensive Pt-based catalysts for MFC applications.

Performance of microbial fuel cell with graphene doped bioanode

A graphene/poly(3,4-ethylenedioxythiophene) hybrid as an anode for high-performance microbial fuel cells

Graphene/Fe 3 O 4 Nanocomposites as Efficient Anodes to Boost the Lifetime and Current Output of Microbial Fuel Cells.

Modification of carbon based cathode electrode in a batch-type microbial fuel cells

Performance evaluation of microbial fuel cell fabricated using green nano-graphene oxide as coating anode material

Enhanced electroactive bacteria enrichment and facilitated extracellular electron transfer in microbial fuel cells via polydopamine coated graphene aerogel anode

Enhancing microbial fuel cell performance: anode modification with reduced graphene oxide and iron(III) for improved electricity generation

Effect of electrode types on simultaneous anaerobic sulfide and nitrate removal in microbial fuel cell (vol 134, pg 20, 2014)

Nitrogen-doped graphene oxide with enhanced bioelectricity generation from microbial fuel cells for marine sewage treatment

Carbon nanofiber/graphene hybrids anchoring Fe, N, S heteroatoms simultaneously enhancing extracellular electron transfer and biofilm adhesion in microbial fuel cells

Binder-free graphene and manganese oxide coated carbon felt anode for high-performance microbial fuel cell

The Performance of a Modified Anode Using a Combination of Kaolin and Graphite Nanoparticles in Microbial Fuel Cells

Bacteria-Affinity 3D Macroporous Graphene/MWCNTs/Fe3O4 Foams for High-Performance Microbial Fuel Cells.

Facile Fabrication of Graphene-Containing Foam as a High-Performance Anode for Microbial Fuel Cells

Integrated tea polyphenols and polydopamine functionalized graphene anode for improved bioelectricity generation and Cr(VI) reduction in microbial fuel cells

Graphene-based Electrode Materials for Microbial Fuel Cells

Modification of the anodes using MoS2 nanoflowers for improving microbial fuel cells performance

A review on graphene / graphene oxide supported electrodes for microbial fuel cell applications: Challenges and prospects

The enhancement of microbial fuel cell performance by anodic bacterial community adaptation and cathodic mixed nickel–copper oxides on a graphene electrocatalyst

Nanostructured Graphene/Tio2 Hybrids As High-Performance Anodes for Microbial Fuel Cells

Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells.