Abstract:Fluidized catalytic cracking (FCC) is the most used process for converting heavy oil into more valuable fuels and chemical products such as gasoline and propylene. The conventional steady state and dynamic models that have commonly been used to study FCC units assume simple plug flow in the riser reactor and two-region (i.e., freeboard and dense bed) twophase (i.e., bubble phase and emulsion phase) in the catalyst regenerator. As a remedy to the limited accuracy yielded by such assumptions, an integrated model based on the equivalent reactor network (ERN) approach is built in order to accurately model a pilot-scale residue FCC (RFCC) unit. The model involves 8-reactor and 10-reactor networks to characterize complex hydrodynamics within the regenerator and the riser reactor, respectively. Also, a coke combustion kinetic model and a ten-lump kinetic model describing the cracking reactions, as well as the necessary thermodynamic models, are coupled with the ERN hydrodynamic models. The validation of the integrated models shows good agreement with available experimental data. The model is subsequently used to investigate the effects of operating conditions such as reaction temperature, residence time, and catalyst-to-oil ratio on the product yield distribution in the RFCC unit. Finally, the model is used to demonstrate the superiority of the RFCC-Maxing-Propylene process over the conventional RFCC process. It is believed that the developed model can help researchers and engineers carry out further RFCC process investigations such as dynamic analysis and real-time control and optimization.

Dynamic Modeling and Simulation of FCCU Reactor-Regenerator System

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

FCCU REACTOR-REGENERATOR PREDICTIVE CONTROL

Modeling and Simulation of Commercial Catalytic Reformers

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Eight Lumps Kinetic Model for Residual Oil Catalytic Cracking

Modeling and simulation of FCCU reactor-regenerator system

FCCU Reactor - Regenerator Advanced Control

Modeling and Parameter Identification of FCCU Regenerator with Modified Levenberg-Marquardt Algorithm

DYNAMIC MODELING AND SIMULATION SOFTWARE DEVELOPMENT FOR FLUID CATALYTIC CRACKING UNIT

3D virtual full-loop CFD simulation of industrial two-stage FCC reaction–regeneration system

Prediction of molecular distribution and temperature profile of FCC process through molecular-level kinetic modeling

Modeling and Optimization of a Fractionation, Absorption, and Stabilization System in an Industrial Fluid Catalytic Cracking Process

Dynamic modelling and simulation for catalytic reforming unit

Novel Integrated Reactor-Regenerator Model for the Fluidized Catalytic Cracking Unit Based on an Equivalent Reactor Network

An Integrated Methodology for the Modeling of Fluid Catalytic Cracking (FCC) Riser Reactor

Steady State Modeling and Simulation of an Industrial Combustor-Style Fluidized Catalytic Cracking Regenerator

Numerical Simulation on Gas-Solid Two-Phase Turbulent Flow in Fcc Riser Reactors (I) Turbulent Gas-Solid Flow-Reaction Model

Integrated Hybrid Modelling and Surrogate Model-Based Operation Optimization of Fluid Catalytic Cracking Process

Reactor Model of Counter-Current Continuous Catalyst-Regenerative Reforming Process toward Real Time Optimization

CFD–DEM Simulation of Gas–solid Reacting Flows in Fluid Catalytic Cracking (FCC) Process