Abstract:The mechanism models based on structure-oriented lumping (SOL) deliver a satisfactory prediction on the properties and yield distribution of the products from fluid catalytic cracking (FCC). However, with high complexity and low computing efficiency, such a model is increasingly unable to meet the needs of refineries to produce lighter and greener products using heavier and poorer feedstocks. Therefore, in this paper, a modeling approach hybridizing molecular mechanism and data models was proposed to describe the maximizing iso-paraffins (MIP) technology of the FCC process. This proposed model showed assured prediction accuracy with shortened computing time and thus was appropriate for online application. In this work, model simplification was carried out: less molecules and reactions (3078 and 5216, respectively) were adopted, along with a simplified reactor model, which largely reduced the computation load. CatBoost algorithm was also adopted for constructing a data model, to compensate for the accuracy loss resulting from the simplified SOL mechanism model. Combining with the mechanism model, it ensured the accuracy of prediction while greatly shortened the computing time. Furthermore, to overcome the strong coupling between the process variables to be solved, this work adopted the method of case-based reasoning (CBR) to optimize the process and expanded the case base with the prediction results of the hybrid model, which ensured the feasibility of the solution parameters and shortened the computing time. The hybrid model and the corresponding process optimization strategy proposed were then applied to an industrial FCC MIP process for verification. The results show that the hybrid model could assure the prediction accuracy (comparable with the conventional mechanism model) while the computing time was reduced from more than 20 h to less than 1 min. In the process optimization validation test, the total liquid yield increased by 1.19% on average for 43 out of 50 sets of operating configurations and the coke yield decreased by 1.05% on average. This work provides a good solution for the online process optimization of FCC.

Modeling and Optimization of a Fractionation, Absorption, and Stabilization System in an Industrial Fluid Catalytic Cracking Process

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

A Databased FCC On-line Steady State Optimization System

Gray Wolf Optimizer with Bubble-Net Predation for Modeling Fluidized Catalytic Cracking Unit Main Fractionator

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Development and Application of Industrial Catalytic Cracking Process Online Calculation

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Integrated Hybrid Modelling and Surrogate Model-Based Operation Optimization of Fluid Catalytic Cracking Process

Process Simulation and Optimization of Fluid Catalytic Cracking Unit's Rich Gas Compression System and Absorption Stabilization System

Online Optimization of Fluid Catalytic Cracking Process Via a Hybrid Model Based on Simplified Structure-Oriented Lumping and Case-Based Reasoning

Prediction of molecular distribution and temperature profile of FCC process through molecular-level kinetic modeling

Economic Operation of a Fluid Catalytic Cracking Process Using Self-Optimizing Control and Reconfiguration

Dynamic Modeling and Simulation of FCCU Reactor-Regenerator System

Bottleneck Identification and Debottleneck of the Absorption and Stabilization System in the Revamped FCC Unit

Design and control of fluid catalytic cracking gasoline fractionator

A coupling model of fluid catalytic cracking and diesel hydrotreating processes to study the effects of reaction temperature on the composition of diesel

Optimization of fluid catalytic cracking unit reactor and energy system

Modeling and Stable State Optimal Control for FCC Process

Multi-objective Optimization Strategy for Industrial Catalytic Cracking Units: Kinetic Model and Enhanced SPEA-2 Algorithm with Economic, CO2, and SO2 Emission Considerations

On applying advanced process control for FCCU in a petroleum refinery

Multi-objective optimization strategy for industrial catalytic cracking units: Kinetic model and enhanced SPEA-2 algorithm with economic, CO 2 , and SO 2 emission considerations