Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Organic thin-film transistors processed from relatively nontoxic, environmentally friendlier solvents

Thiophene Polymer Semiconductors for Organic Thin-Film Transistors.

A nonchlorinated solvent-processed polymer semiconductor for high-performance ambipolar transistors

Nonhalogenated Solvent Processable and Printable High-Performance Polymer Semiconductor Enabled by Isomeric Nonconjugated Flexible Linkers

High-performance Semiconducting Polythiophenes for Organic Thin-Film Transistors.

A Stable Solution-Processed Polymer Semiconductor with Record High-Mobility for Printed Transistors

Editorial: High-Performance Organic Thin-Film Transistors

Organic Transistors Based on Highly Crystalline Donor–Acceptor π-Conjugated Polymer of Pentathiophene and Diketopyrrolopyrrole

Design of Novel Functional Conductive Structures and Preparation of High-Hole-Mobility Polymer Transistors by Green Synthesis Using Acceptor–Donor–Acceptor Strategies

High-Performance, Stable Organic Thin-Film Field-Effect Transistors Based on Bis-5‘-alkylthiophen-2‘-yl-2,6-anthracene Semiconductors

A soluble and air-stable organic semiconductor with high electron mobility

[The vascularization of the epididymis of the boar with special reference to perfusion fixation].

Enabling Gate Dielectric Design for All Solution-Processed, High-Performance, Flexible Organic Thin-Film Transistors.

Organic Thin-Film Transistors with Poly(Methyl Silsesquioxane) Modified Dielectric Interfaces

Solution‐Processable Multifused Thiophene Small Molecules and Conjugated Polymer Semiconducting Blend for Organic Field Effect Transistor Application

Thiophene-based molecular and polymeric semiconductors for organic field effect transistors and organic thin film transistors

A Unique Solution-Processable n-Type Semiconductor Material Design for High-Performance Organic Field-Effect Transistors

Towards Organic Transistors

Surface Etching of Polymeric Semiconductor Films Improves Environmental Stability of Transistors

Oligofluorene−Thiophene Derivatives As High-Performance Semiconductors for Organic Thin Film Transistors

Highly conductive alcohol‐processable n‐type conducting polymer enabled by finely tuned electrostatic interactions for green organic electronics