Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

A Unique Solution-Processable n-Type Semiconductor Material Design for High-Performance Organic Field-Effect Transistors

Organic Thin Film Transistors Incorporating Solution Processable Thieno[3,2-b]thiophene Thienoacenes

Editorial: High-Performance Organic Thin-Film Transistors

High Performance Solution Processed n‐Type OTFTs through Surface Engineered F–F Interactions Using Asymmetric Silicon Phthalocyanines

Ultrahigh Mobility and Efficient Charge Injection in Monolayer Organic Thin-Film Transistors on Boron Nitride.

Solution‐Processable Multifused Thiophene Small Molecules and Conjugated Polymer Semiconducting Blend for Organic Field Effect Transistor Application

Benzothiadiazole versus Thiazolobenzotriazole: A Structural Study of Electron Acceptors in Solution-Processable Organic Semiconductors

A soluble and air-stable organic semiconductor with high electron mobility

Fused Bithiophene Imide Dimer-Based n-Type Polymers for High-Performance Organic Electrochemical Transistors

Highly Efficient Mixed Conduction in a Fused Oligomer n‐Type Organic Semiconductor Enabled by Three‐Dimensional Transport Pathways

Thiophene Polymer Semiconductors for Organic Thin-Film Transistors.

Solution-processed and Air-Stable N-Type Organic Thin-Film Transistors Based on Thiophene-Fused Dicyanoquinonediimine (DCNQI) Deriatives.

Fully Solution-Processed Flexible Organic Thin Film Transistor Arrays with High Mobility and Exceptional Uniformity

Solution-Processable liquid crystalline organic semiconductors based on 6-(Thiophen-2-yl)benzo[b]thiophene for organic thin-film transistors

Large‐Area Processable Ultrathin Organic Transistors with High Mobility and Mechanical Stabilities

High-Performance n-type Polymer Field-effect Transistors with Exceptional Stability

Solution Processable Pentafluorophenyl End‐Capped Dithienothiophene Organic Semiconductors for Hole‐Transporting Organic Field Effect Transistors

Patterning Solution-Processed Organic Single-Crystal Transistors with High Device Performance

A Solution Processable Dithioalkyl Dithienothiophene (DSDTT) Based Small Molecule and Its Blends for High Performance Organic Field Effect Transistors

Diketopyrrolopyrrole-based small molecules for solution-processed n-channel organic thin film transistors

High-performance Organic Thin-film Transistors: Principles and Strategies