Abstract:Organic solar cells (OSCs) are a promising next-generation photovoltaic technology that can be used to harvest clean and renewable solar energy. OSCs are typically composed of donor:acceptor blends as photo-active materials. Compared to the conventional inorganic silicon solar cells, OSCs are suitable for large-scale production using roll-to-roll technology, promising low-cost and the potential to avoid environmental pollution. The last few years have witnessed the rapid development of OSCs. The power conversion efficiencies (PCEs) of OSCs have surpassed similar to 14%-16%, benefiting from the design of novel materials, optimization of blend morphology, and deep understanding of the charge generation mechanism. Currently, the most widely used processing solvents for preparing high-efficient OSCs are chlorinated or aromatic solvents including chlorobenzene, dichlorobenzene, and chloroform, which are highly detrimental to the environment and human health, and may not be utilized for future in industry. Thus, replacing these highly toxic solvents with environmentally friendly alternatives called "green solvents" is an important topic in OSC research. Herein, poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene)-co-(1,3-di(5-thiophene-2-yl)-5,7-bis(2-ethylhexyl)benzo[1,2-c:4,5-c']dithiophene-4,8-dione)] (PBDB-T) was used as a reference material to design and synthesize a novel conjugated polymer (PBDB-DT) by extending the alkyl side chains and enlarging the conjugated side groups. The thermal stability of the polymer donor was examined via thermogravimetric analysis, showing that the polymers exhibit very good stability at >400 degrees C. Importantly, PBDB-DT exhibits good solubility in low-toxic solvent tetrahydrofuran (THF) due to its longer alkyl side chains, and shows a strong aggregation effect in THF due to the larger conjugated side groups. A favorable PCE of 10.2% was achieved for the THF-processed PBDB-DT:IT-M based OSC device. In contrast, PBDB-T has limited solubility in THF. The solar cell device based on PBDB-T:IT-M delivered a moderate PCE of 6.41%. The investigation of blend morphology via atomic force microscope suggested that the PBDB-DT:IT-M has a smooth surface, which is favorable for charge generation and transport. These results demonstrate that molecular optimization is a promising strategy to modulate the solubility and achieve high efficiency for organic photovoltaic materials processed using green solvents.

Highly conductive alcohol‐processable n‐type conducting polymer enabled by finely tuned electrostatic interactions for green organic electronics

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

A solution-processed n-type conducting polymer with ultrahigh conductivity

Highly conductive polymer electrodes for polymer light-emitting diodes

A high-conductivity n-type polymeric ink for printed electronics

Polyethylene glycol-decorated n-type conducting polymers with improved ion accessibility for high-performance organic electrochemical transistors

Rising advancements in the application of PEDOT:PSS as a prosperous transparent and flexible electrode material for solution-processed organic electronics

A Water-Dispersible Quinoid-Resonant Conducting Polymer for Organic Electronics

Directly Patternable, Highly Conducting Polymers for Broad Applications in Organic Electronics

A Highly Conductive n -Type Conjugated Polymer Synthesized in Water

A Solution-Processed N-Type Conducting Polymer Without Side Chains Formed Via Nonmetal-Participated Polymerization and in Situ N-Doping

Ultrafast-laser-treated poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) electrodes with enhanced conductivity and transparency for semitransparent perovskite solar cells

Improved Stability and Performance of an N-Type Depletion Mode Poly(benzodifurandione) Based Organic Electrochemical Transistor Via Electrolyte Selection

Porous Semiconducting Polymers Enable High‐Performance Electrochemical Transistors

Electron-Rich Alcohol-Soluble Neutral Conjugated Polymers as Highly Efficient Electron-Injecting Materials for Polymer Light-Emitting Diodes

Solvent Processed Conductive Polymer with Single-Walled Carbon Nanotube Composites

A nonchlorinated solvent-processed polymer semiconductor for high-performance ambipolar transistors

Highly Stable and Flexible Transparent Conductive Polymer Electrode Patterns for Large-Scale Organic Transistors

Enhancing the Electrochemical Doping Efficiency in Diketopyrrolopyrrole‐Based Polymer for Organic Electrochemical Transistors

Realizing Green Solvent Processable Organic Solar Cells by Modulating the Chemical Structure of Conjugated Polymers

Highly Transmissive, Processable, Highly Conducting and Stable Polythiophene Derivatives via Direct (Hetero)arylation Polymerization