Abstract:Carbon dioxide capturing from the flue gas of power stations is an effective way to mitigate the global warming. In order to predict the performance from startup to stable operation in CO2 absorption process, a multi-field synergy model was developed based on CO2 capture process in a packed column by means of monoethanolamine (MEA). The model suggests that the integral diffusion–reaction coefficient plays an important role in the diffusion, fluid flow, heat transfer and chemical reaction processes. The influences of the fluid flow, heat transfer and chemical reaction can be justified using corresponding synergy numbers, quantifying multi-field interactive dynamic characteristics of the CO2 capture process. The simulation shows a good agreement compared with data in the literature. The results show that the packing Reynolds number can be used as a criterion to choose the proper packing. The less the Reynolds number is, the more efficient the reaction absorption is. The average synergy number Fdc would be decreased by 20% with 6K temperature drop and be descended by 7% with the 2.5% solvent weight percentage increment, which improved the efficiency of CO2 capture by about 5% and 14%, and lowered the energy consumption by about 5%. The average synergy number Fdh would be decreased by about 8% with the 0.062mol/molMEA lean solvent loading increment, which improved the efficiency by about 15% and lowered the energy consumption by 5%. After comparing with CMR-2, Raschig rings, Berl saddles and Pall rings, the 33% less average synergy number Fdf of the CMR-2 packing with about 5% drop in energy consumption yields the highest efficiency of 71%, which is 10% higher than that of the Berl saddle packing. The results indicate that the proposed multi-field synergy model is an effective way to intensify the capture process as a guideline with the priority of precision and simplicity.

Soft-sensing Study of Ion Concentration in Process of Carbon Dioxide Capture by Absorption

Measurement and Control System in Process of Carbon Dioxide Capture Based on Sparse Support Vector Machine

Performance study of moisture swing adsorption membrane for CO_2 capture from ambient air

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

Soft sensor modeling via support vector regression with KICA-based feature extraction

Multi-field synergy study of CO2 capture process by chemical absorption

Research on Modern CO2 Absorption Process

Soft measurement of heating value of burning municipal solid waste forcirculating fluidized bed

Absorption solubility calculation and process simulation for CO; capture

Absorption Solubility Calculation and Process Simulation for CO2 Capture

Novel infrared differential optical absorption spectroscopy remote sensing system to measure carbon dioxide emission

Study of soft sensor modeling based on deep learning

Experimental Study and Modified Modeling on Effect of SO2 on CO2 Absorption Using Amine Solution

An on-line model for CO2 separating from Natural Gas Membrane Separation Process based on LSSVM

Soft Sensor Modeling for Oxygen-Content in Flue Gasses in 1000MW Ultra-superficial Units

Rate-Based Modelling and Validation of an Absorber and Stripper in an Amine-Based Post-Combustion CO2 Capture Process

Energy-efficiency analysis of industrial CO2 removal system using nanoabsorbents

Simulation of a CO_2 Capture System Using Amine Solutions for Selection of Absorbents

A Soft Sensor for Carbon Content of Spent Catalyst in a Continuous Eforming Plant Using LSSVM-GA

Assessment of carbon dioxide separation by amine solutions using electrolyte non-random two-liquid and Peng-Robinson models: Carbon dioxide absorption efficiency

High-precision concentration detection of CO 2 in flue gas based on BO-LSTM and variational mode decomposition