Abstract:This study addresses the challenges of time-delay and low accuracy in online gas-phase composition monitoring during olefin copolymerization processes. Three flowmeters based on different mechanisms are installed in series to measure the real-time exhaust gas flow rate from the reactor. For the same gas flow, the three flowmeters display different readings, which vary with the properties and composition of the gas mixture. Consequently, the composition of the mixed gas can be determined by analyzing the reading of the three flowmeters. Fitting equations and three machine learning models, namely decision trees, random forests, and extreme gradient boosting, are employed to calculate the gas composition. The results from cold-model experimental data demonstrate that the XGBoost model outperforms others in terms of accuracy and generalization capabilities. For the concentration of ethylene, propylene, and hydrogen, the determination coefficients (R2) were 0.9852, 0.9882, and 0.9518, respectively, with corresponding normalized root mean square error (NRMSE) values of 0.0352, 0.0312, and 0.0706. The effectiveness of the online monitoring device is further validated through gas phase copolymerization experiments involving ethylene and propylene. The yield and composition of the ethylene and propylene copolymers are successfully predicted using the online measurement data. To overcome the time-delay and low precision in on-line gas phase composition monitoring during olefin copolymerization, three flowmeters based on distinct principles are employed to detect exhaust gas in real-time. Machine learning models are used to calculate the gas composition. The efficacy of the online monitoring device is validated through gas phase copolymerization experiments of ethylene and propylene.image

An on-line model for CO2 separating from Natural Gas Membrane Separation Process based on LSSVM

On‐Line Monitoring Device for Gas Phase Composition Based on Machine Learning Models and Its Application in the Gas Phase Copolymerization of Olefins

Soft Sensor Modeling Based on ISVM and Its Application in PX Fractionation

Modeling of Isomerization of C-8 Aromatics by Online Least Squares Support Vector Machine

Adaptive Soft-Sensor Modeling Algorithm Based on Fcmisvm and Its Application in Px Adsorption Separation Process

Modeling of hydrogen recovery membrane separation process based on PCA-LSSVM

Optimal Online Soft Sensor for Product Quality Monitoring in Propylene Polymerization Process

Process optimization of CO2membrane and cryogenic hybrid separation

Soft measurement system for monitoring syrup supersaturation during a sugar crystallization process based on a least squares support vector machine

Performance Design of a Cryogenic Air Separation Unit for Variable Working Conditions Using the Lumped Parameter Model

Three-stage model of gas membrane separation based on a least squares support vector machine

Multicomponent Spiral Wound Membrane Separation Model for CO2 Removal from Natural Gas

Performance evaluation of packed tower liquid desiccant dehumidifier based on LSSVM

LSSVM Modeling for Boiler Combustion and Denitrification Integrated System Based on Adaptive GA Variable Selection

Combustion process modeling based on deep sparse least squares support vector regression

Modeling of Spiral Wound Membranes for Gas Separations—Part IV: Real-Time Monitoring Based on Detailed Phenomenological Model

Local Parameter Optimization of LSSVM for Industrial Soft Sensing with Big Data and Cloud Implementation

Computational simulation using machine learning models in prediction of CO2 absorption in environmental applications

Robust monitoring of solvent based carbon capture process using deep learning network based moving horizon estimation

Development of a multicomponent counter‐current flow model to evaluate the impact of oxygen and water vapor on CO2 removal performance in a hollow fiber membrane contactor

Correction model for CO detection in the coal combustion loss process in mines based on GWO-SVM