Abstract:Nowadays, excess methane emissions have caused serious environmental problems, of which catalytic oxidation is a practical and economically feasible technique for its decomposition and harm reduction. Here, three-dimensionally ordered macroporous (3DOM) LaFe1-xCoxO3 (x = 0, 0.1, 0.3, 0.5) were prepared by colloidal crystal template (CCT) method using polynomial methacrylate (PMMA) as templates in order to evaluate their catalytic activities for methane. Numerous analytical techniques were used to characterize the physicochemical properties of as-prepared perovskite catalysts. The results showed that the morphology of the catalysts depended strongly on the PMMA template and an appropriate calcination temperature was decisive for the formation of a high-quality 3DOM structure, which affected the textural parameters, the surface compositions of the catalysts and further determined their catalytic activities for methane. Along with the doping of Co for Fe at the B site, the BET surface areas and crystallite sizes could be optimized, and the ratios of Fe4+/Fe3+, absorbed oxygen (O-ads)/lattice oxygen (O-lat) both increased with the increment of Co substitution, which were beneficial to improve the catalytic activity on CH4. However, the surface carbonate or hydroxide compounds also increased with the increment of Co doping and did harm to the catalytic activity in an opposite way. The final result was that the 3DOM LaFeO3 calcined at 700 degrees C (Ea = 70.9 kJ/mol, T-50% = 548 degrees C, T-90%= 652 degrees C), with the optimal pore size, pore volume, Fe4+/Fe3+ ratio, H-2-TPR reducibility, on stream testing stability and carbon deposition resistance in low temperature, showed much better performance than the Co-doped 3DOM LaFe1-xCoxO3 (x = 0.1, 0.3, 0.5) in the methane catalytic process. However, it was also predictable that the performance of methane oxidation by Co-doped perovskites can be improved if the surface carbonate or hydroxide compounds can be effectively controlled in the future by surface engineering methods like acid treated or others to eliminate La segregation on its surface.

Hydrothermal Synthesis and Catalytic Performance of Single-Crystalline La2−xSrxCuO4 for Methane Oxidation

Catalytic Behavior of Hydrothermally Synthesized La0.5Sr0.5MnO3 Single-Crystal Cubes in the Oxidation of CO and CH4

Study on the Structure and Methane Combustion Activity of Hexaaluminates Catalysts La_(1-x)Sr_xMnAl_(11)O_(19-δ)

Catalytic combustion of methane over various perovskite-type oxides

Evaluation of Three‐Dimensionally Ordered Macroporous LaFe &Lt;sub>1-X</sub>co <sub>x</sub>o <sub>3</sub> Perovskites and Their Performance for Catalytic Oxidation of Methane

Effects of partial substitution of Cu by Mn and Co in LaCu0.5Ni0.5O3 catalyst synthesized by mechanochemical method in the total oxidation of methane

Evaluation of Three‐Dimensionally Ordered Macroporous LaFe 1-Xco Xo 3 Perovskites and Their Performance for Catalytic Oxidation of Methane

Selective Catalytic Reduction ofNOx by Methane over La(1-x)SrxMnO3 Perovskites

Effect of Cu Doping on the Structure and Catalytic Activity of LaMnO_3 Catalyst

Preparation, Characterization and Catalytic Activities of La0.8Sr0.2Fe1-xScxO3-delta Catalysts for Methane Combustion

Facile One-Step Flame Synthesis of La1−xSrxMnO3 Nanoparticles for CO Catalytic Oxidation

Preparation and evaluation of the LaCu1-xNixO3 (x = 0, 0.1, 0.3, 0.5 and 0.7) perovskite catalysts for total oxidation of methane

Catalytic performance of La–Ce–O mixed oxide for combustion of methane

Activation of Methane over Perovskite Catalysts

Structural investigation of LaCoO3 and LaCoCuO3 perovskite-type oxides and the effect of Cu on coke deposition in the partial oxidation of methane

Preparation, Characterization and Catalytic Activities of La0.8Sr0.2Fe1-xScxO3-δ Catalysts for Methane Combustion

A Study of the Catalytic Properties of SrTi1-xMg xO3-δ Perovskite-type Catalysts for Oxidative Coupling of Methane

Methane Catalytic Combustion under Lean Conditions over Pristine and Ir-Loaded La1−xSrxMnO3 Perovskites: Efficiency, Hysteresis, and Time-on-Stream and Thermal Aging Stabilities

Enhanced Activity of La1-xMnCuxO3 Perovskite Oxides for Chemical Looping Steam Methane Reforming

A Study Of The Catalytic Properties Of Srti1-Xmgxo3-Delta Perovskite-Type Catalysts For Oxidative Coupling Of Methane

Effect of Jahn−Teller Distortion in La0.5Sr0.5MnO3 Cubes and Nanoparticles on the Catalytic Oxidation of CO and CH4