Abstract:The gas-solid flow in a three-dimensional slot-rectangular spouted bed is numerically investigated under the parallel framework of the computational fluid dynamics-discrete element method coupling approach. The fluid phase is solved with the k-epsilon turbulence model at the computational grid level, while the solid phase is tracked individually with the discrete element method at the particle scale. Millions of particles are calculated using a total number of 112 CPUs in a cluster. The predicted pressure drop profiles and the minimum spouting velocities of the calculations under different bed heights agree well with the experimental data. The startup procedure and the solid flow pattern are identified. Then, wall effects on the distribution properties of the gas-solid hydrodynamics are explored. Moreover, the interaction between spout and annulus and the effects of the superficial velocity and bed height on the bed hydrodynamics are discussed. The results show that a larger pressure drop appears in the system with a higher bed height. A bubble with its shape influenced by the slot geometry is formed in the startup procedure. Moreover, the bed hydrodynamics show a strong 3-D behavior along the depth direction. Large vertical solid flux mainly concentrates in the central region of the spout. The spout-annulus interface is dramatically influenced by the slot shape and shows different evolutionary tendencies in the different directions, and this influence becomes weaker along the bed height. The larger the superficial velocity is, the higher the bed height and the larger the spouting height appear. Besides, solid flow patterns under different bed heights with the superficial velocity the same ratio to the corresponding minimum spouting velocity show a similar behavior.

Internal circulation characteristics in gas-particle main reaction zone of multi-spouted bed

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

CFD Simulation of Hydrodynamic Characteristics in a Multiple-Spouted Bed

Investigation of fluidization behavior of high density particle in spouted bed using CFD–DEM coupling method

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Numerical and Experimental Study of Integral Multi-Jet Structure Impact on Gas-Solid Flow in a 3D Spout-Fluidized Bed

Numerical Simulation of the Characteristics of Particle Flows in an Internally Circulating Fluidized Bed

Influences of operating parameters on the hydrodynamics of a 3-D spout–fluid bed based on DEM modeling approach

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach

Study on the Hydrodynamics of a Spouting−Moving Bed

Numerical Simulation and Optimization of Hydrodynamics in a Novel Integral Multi-Jet Spout-Fluidized Bed

Numerical Investigation of the Gas‐Solid Flow Characteristics in a Three‐Dimensional Spouted Bed with a Draft Tube

Numerical Investigation of the Time-Related Properties of Solid Phase in a 3-D Spout-Fluid Bed

Numerical Investigation of Gas–solid Flow Behavior in a Novel Integral Multi-Jet Spout-Fluidized Bed

Solids flow characteristics and circulation rate in an internally circulating fluidized bed

Influence of Internals on Gas-solid Flow Behavior in Square-section Circulating Suspension Bed

A CFD-DEM study of a two-joint spouting flow pattern in a multiple rectangular spout fluidized bed

Particle dispersion and circulation patterns in a 3D spouted bed with or without draft tube

EXPERIMENTAL STUDY ON PARTICLE FLOW CHARACTERISTICS IN A CLAPBOARD-TYPE INTERNAL CIRCULATING FLUIDIZED BED REACTOR